Raspberry Pi Iot In C

Author : John C. Shovic
Publisher : Apress
ISBN 13 : 1484213777
Total Pages : 253 pages
Book Rating : 4.73/5 ( download)

DOWNLOAD NOW!

Download or read book Raspberry Pi IoT Projects written by John C. Shovic and published by Apress. This book was released on 2016-08-12 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: Build your own Internet of Things (IoT) projects for prototyping and proof-of-concept purposes. This book contains the tools needed to build a prototype of your design, sense the environment, communicate with the Internet (over the Internet and Machine to Machine communications) and display the results. Raspberry Pi IoT Projects provides several IoT projects and designs are shown from the start to the finish including an IoT Heartbeat Monitor, an IoT Swarm, IoT Solar Powered Weather Station, an IoT iBeacon Application and a RFID (Radio Frequency Identification) IoT Inventory Tracking System. The software is presented as reusable libraries, primarily in Python and C with full source code available. Raspberry Pi IoT Projects: Prototyping Experiments for Makers is also a valuable learning resource for classrooms and learning labs. What You'll Learn build IOT projects with the Raspberry Pi Talk to sensors with the Raspberry Pi Use iBeacons with the IOT Raspberry Pi Communicate your IOT data to the Internet Build security into your IOT device Who This Book Is For Primary audience are those with some technical background, but not necessarily engineers. It will also appeal to technical people wanting to learn about the Raspberry Pi in a project-oriented method.

Author : Harry Fairhead
Publisher :
ISBN 13 : 9781871962635
Total Pages : 412 pages
Book Rating : 4.33/5 ( download)

DOWNLOAD NOW!

Download or read book Raspberry Pi IoT In C written by Harry Fairhead and published by . This book was released on 2020-10-03 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Raspberry Pi makes an ideal match for the Internet of Things. But to put it to good use in IoT you need two areas of expertise, electronics and programming and, because of the way hardware and software engineering tend to occupy separate niches, you may need help with combining the two. This book teaches you to think like an IoT programmer. In Raspberry Pi IoT in C you will find a practical approach to understanding electronic circuits and datasheets and translating this to code, specifically using the C programming language. The main reason for choosing C is speed, a crucial factor when you are writing programs to communicate with the outside world. If you are familiar with another programming language, C shouldn't be hard to pick up. This Second Edition has been brought up-to-date and focuses mainly on the Pi 4 and the Pi Zero. There is new material on the recently introduced GPIO character driver and using the Pi 4's additional ports and scheduling. Although NetBeans is used to develop programs, VS Code is now considered an alternative remote development environment and all the book's code, which is available for download, has been tested with VS Code. The main idea in this book is to not simply install a driver, but to work directly with the hardware using the Raspberry Pi's GPIO (General Purpose Input Output) to connect with off-the-shelf sensors. It explains how to use its standard output with custom protocols, including an in-depth exposition of the 1-wire bus. You will also discover how to put the Internet into the IoT using sockets. After reading this book you will be in a better position to tackle interfacing anything-with-anything without the need for custom drivers and prebuilt hardware modules. Harry Fairhead has worked with microprocessors and electronics in general for many years and is an enthusiastic proponent of the IoT. As well as being the Editor of IoT-Programmer.com, he is a regular contributor to I-Programmer.info, where he covers all aspects of hardware. His other recent books include Applying C For The IoT With Linux as well as Fundamental C: Getting Closer To The Machine and Micro: bit IoT in C.

Author : Harry Fairhead
Publisher : I/O Press
ISBN 13 : 9781871962840
Total Pages : 0 pages
Book Rating : 4.46/5 ( download)

DOWNLOAD NOW!

Download or read book Raspberry Pi IoT In C, 3rd Edition written by Harry Fairhead and published by I/O Press. This book was released on 2024-01-09 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reviews of the previous edition: "A complete explanation that makes it straightforward to interface I/O options to the Pi. Good examples are easy to follow and well explained - starting with "Hello World" and then walks through the various interface options available with GPIO. I highly recommend this to anyone using the Pi for any embedded system application requiring various types of interfaces." "This is the book to read to get deep into Raspberry IoT. Programming examples are provided. Great book!" The Raspberry Pi makes an ideal match for the Internet of Things. But to put it to good use in IoT you need two areas of expertise, electronics and programming and, because of the way hardware and software engineering tend to occupy separate niches, you may need help with combining the two which is the role of this book. This 3rd Edition was prompted by the arrival of the Pi 5. Unfortunately, as the Pi 5 uses the new RP1 chip to implement its peripherals, it is incompatible with all of the IoT libraries that work directly with the hardware. As a result it is excluded from much of this book. A whole chapter is, however, devoted to getting started with an IoT project with the Pi 5 and it is also covered in chapters on the Linux GPIO driver and on the use of the Pi's serial ports and in a chapter, which describes how to access the Pi 5's registers directly. What is more important than the Pi 5 from the point of view of IoT is the Pi Zero 2W, which is a much faster, quad-core, version of the Pi Zero W making it an excellent choice for IoT projects. It is covered for the first time in this edition. Another reason for a new edition is to update its programs to the new versions of Pi OS, Bookworm and Bullseye. Finally, a major change is that VS Code is now the book's IDE of choice and to make it easy to use as a remote development environment with all versions of Pi from Pi Zero to Pi 5, a set of custom VS Code tasks are supplied, which are downloadable as well as included in the book. The main idea in this book is to work directly with the hardware using the Raspberry Pi's GPIO (General Purpose Input Output) to connect with off-the-shelf sensors. After reading it you will be in a better position to tackle interfacing anything-with-anything without the need for custom drivers and prebuilt hardware modules. Harry Fairhead has worked with microprocessors and electronics for many years and is an enthusiastic proponent of the IoT. C is his programming language of choice and he has written several books on programming the Raspberry Pi and other devices in an IOT context, including Raspberry Pi IoT in C With Linux Drivers, Second Edition, Programming the ESP32 in MicroPython and Fundamental C: Getting Closer To The Machine. Currently, his most popular title is Programming the Raspberry Pi Pico/W in C.

Author : Harry Fairhead
Publisher : I/O Press
ISBN 13 : 9781871962857
Total Pages : 0 pages
Book Rating : 4.54/5 ( download)

DOWNLOAD NOW!

Download or read book Raspberry Pi IoT In C Using Linux Drivers, 2nd Edition written by Harry Fairhead and published by I/O Press. This book was released on 2024-01-27 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Raspberry Pi makes an ideal match for the Internet of Things. To put it to good use in IoT you need two areas of expertise, electronics and programming and this presents a barrier to getting started. However, there is an overlooked route that can provide a shortcut. Pi OS, the Raspberry Pi's operating system is Linux based and Linux drivers are available for many off-the-shelf IoT devices. These provide a very easy-to-use, high-level way of working. The problem that this book solves is that there is very little documentation to help you get started. In it Harry Fairhead explains the principles so that you can tackle new devices and he also guides you through using external hardware via standard Linux drivers. Throughout this book you will find a practical approach to understanding electronic circuits and datasheets and translating this to code, specifically using the C programming language. This second edition was prompted by the advent of the Pi 5, welcomed as the fastest member of the Raspberry Pi family. What came as a shock is that, from the point of view of IoT, it is incompatible with all other Raspberry Pis due to the use of a custom chip. Luckily, although the Pi 5 cannot work with the standard IoT libraries it does behave in the same way under Linux drivers and so this new book does include the Pi 5 on an equal footing. Coverage also includes the Pi Zero 2W, which has a quad-core chip making it more capable than both the original Pi Zero and the WiFi-enabled Pi ZeroW. After a quick tour of the Raspberry Pi ecosystem, Visual Studio Code (VS Code) and how it can be used to develop remotely, is introduced. The first IoT program anyone writes is "blinky" to flash an LED and this book is no exception, but it might not be quite what you expect. Instead of using a GPIO line it uses the Linux LED driver - no hardware and no fuss. The GPIO isn't left out, however, as the next three chapters focus on its use via the new GPIO character driver. A key component in any look at Linux and its relationship to hardware is the device tree. While most accounts of this resource are aimed at device driver writers, this one is aimed at device driver users and to this end we look at the DHT22 temperature and humidity driver. After a brief detour into some basic electronics, we look at Pulse Width Modulation supported via a driver rather than needing to be implemented using the GPIO. From here we tackle the two standard buses, I2C and SPI, first going through the basics and then looking at the two attempts to impose a higher organization, the hardware monitoring system, hwmon, and Industrial I/O, IIO. We also look at the 1-Wire bus. The final chapter takes things to the next level and considers creating your own custom overlays by writing fragments to the device tree. Harry Fairhead has worked with microprocessors and electronics in general for many years and is an enthusiastic proponent of the IoT. C is his programming language of choice and he has written several books on programming the Raspberry Pi and other devices in an IOT context, including Raspberry Pi IoT In C, 3rd Edition, Programming the Raspberry Pi Pico/W in C, 2nd Edition, Programming the ESP32 in MicroPython and Fundamental C: Getting Closer To The Machine.

Author : Harry Fairhead
Publisher :
ISBN 13 : 9781871962642
Total Pages : 280 pages
Book Rating : 4.41/5 ( download)

DOWNLOAD NOW!

Download or read book Raspberry Pi IoT In C Using Linux Drivers written by Harry Fairhead and published by . This book was released on 2021-02-08 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Raspberry Pi makes an ideal match for the Internet of Things. To put it to good use in IoT you need two areas of expertise, electronics and programming and this presents a barrier to getting started. However, there is an overlooked route that can provide a shortcut. Pi OS, the Raspberry Pi's operating system is Linux based and Linux drivers are available for many off-the-shelf IoT devices. These provide a very easy-to-use, high-level way of working. The problem that this book solves is that there is very little documentation to help you get started. In it Harry Fairhead explains the principles so that you can tackle new devices and he also guides you through of using external hardware via standard Linux drivers. Throughout this book you will find a practical approach to understanding electronic circuits and datasheets and translating this to code, specifically using the C programming language. The main reason for choosing C is speed, a crucial factor when you are writing programs to communicate with the outside world and if you are familiar with another programming language, C shouldn't be hard to pick up. After a quick tour of the Raspberry Pi ecosystem, Visual Studio Code (VS Code) and how it can be used to develop remotely, is introduced. The first IoT program anyone writes is "blinky" to flash an LED and this book is no exception, but it might not be quite what you expect. Instead of using a GPIO line it uses the Linux LED driver - no hardware and no fuss. The GPIO isn't left out, however, as the next three chapters focus on its use via the new GPIO character driver, which replaces the old and very common sysfs GPIO driver. This is the way to do modern GPIO. A key component in any look at Linux and its relationship to hardware is the relatively new Device Tree. While most accounts of this resource are aimed at device driver writers, this one is aimed at device driver users and to this end we look at the DHT22 temperature and humidity driver. After a brief detour into some basic electronics, we look at Pulse Width Modulation supported via a driver rather than needing to be implemented using the GPIO. From here we tackle the two standard buses, I2C and SPI, first going through the basics and then looking at the two attempts to impose a higher organization, the hardware monitoring system, Hwmon, and Industrial I/O, IIO. The third standard bus, although generally not supported in hardware is the 1-Wire bus. This is covered in detail and even includes an introduction to using Netlink, which uses the sockets API to send messages to and from the kernel to access the driver. The final chapter takes things to the next level and considers creating your own custom overlays by writing fragments to the device tree. Harry Fairhead has worked with microprocessors, and electronics in general, for many years and is an enthusiastic proponent of the IoT. He is the author of Raspberry Pi IoT in C, which has recently been republished in its second edition, updated for Raspberry Pi 4 and co-author of Raspberry Pi IoT in Python Using GPIO Zero. His other recent books include Micro: bit IoT in C, Fundamental C: Getting Closer To The Machine and Applying C For The IoT With Linux.

Author : Mike James
Publisher : I/O Press
ISBN 13 : 9781871962864
Total Pages : 0 pages
Book Rating : 4.62/5 ( download)

DOWNLOAD NOW!

Download or read book Raspberry Pi IoT In Python Using Linux Drivers, 2nd Edition written by Mike James and published by I/O Press. This book was released on 2024-01-23 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Raspberry Pi makes an ideal match for the Internet of Things. To put it to good use in IoT you need two areas of expertise, electronics and programming, and this presents a barrier to getting started. However, there is an overlooked route that can provide a shortcut. Pi OS, the Raspberry Pi's operating system, is Linux- based and Linux drivers are available for many off-the-shelf IoT devices. Using Linux drivers saves the effort of implementing low-level code and has the advantage of working the same on all versions of the Pi, including the recently launched Pi 5 which isn't hardware compatible with earlier versions. This Second Edition has been updated to cover the Pi 5 and also the Pi Zero 2W, which is an ideal candidate for use in IoT projects. It has also been updated to use the latest versions of Pi OS, Bullseye and Bookworm. Throughout this book you will find a practical approach to understanding electronic circuits and datasheets and translating this to code, specifically using Python and VS Code. The first IoT program anyone writes is "Blinky" to flash an LED and this book is no exception, but it might not be quite what you expect. Instead of using a GPIO line driver, it uses the Linux LED driver. The GPIO isn't left out, however, as the next three chapters focus on its use via the GPIO character driver, which replaces the old, but very common, sysfs GPIO driver. This is the way to do modern GPIO. A key component in any look at Linux and its relationship to hardware is the relatively new Device Tree. While most accounts of this resource are aimed at device driver writers, this one is aimed at device driver users and to this end we look at several devices, including the DHT22 temperature and humidity sensor. After a brief detour into some basic electronics, we see how Pulse Width Modulation is supported via a driver. From here we tackle the two standard buses, I2C and SPI, first going through the basics and then looking at the two attempts to impose a higher organization, the hardware monitoring system, hwmon, and Industrial I/O, IIO. The 1-Wire bus is also covered in detail. The final chapter takes things to the next level and considers creating your own custom overlays by writing fragments to the device tree. Harry Fairhead's other books include Applying C For The IoT With Linux; Programming the Raspberry Pi Pico/W, 2nd Ed, Raspberry Pi IoT in C, 3rd Ed, Raspberry Pi IoT in C Using Linux Drivers, 2nd Ed, Programming the Raspberry Pi Pico/W, 2nd Ed and Programming the ESP32 in MicroPython. Mike James is the author of the Programmer's Python: Something Completely Different series of books and several other programming and computer science titles in the I Programmer Library.

Author : Derek Molloy
Publisher : John Wiley & Sons
ISBN 13 : 1119188695
Total Pages : 885 pages
Book Rating : 4.98/5 ( download)

DOWNLOAD NOW!

Download or read book Exploring Raspberry Pi written by Derek Molloy and published by John Wiley & Sons. This book was released on 2016-06-13 with total page 885 pages. Available in PDF, EPUB and Kindle. Book excerpt: Expand Raspberry Pi capabilities with fundamental engineering principles Exploring Raspberry Pi is the innovators guide to bringing Raspberry Pi to life. This book favors engineering principles over a 'recipe' approach to give you the skills you need to design and build your own projects. You'll understand the fundamental principles in a way that transfers to any type of electronics, electronic modules, or external peripherals, using a "learning by doing" approach that caters to both beginners and experts. The book begins with basic Linux and programming skills, and helps you stock your inventory with common parts and supplies. Next, you'll learn how to make parts work together to achieve the goals of your project, no matter what type of components you use. The companion website provides a full repository that structures all of the code and scripts, along with links to video tutorials and supplementary content that takes you deeper into your project. The Raspberry Pi's most famous feature is its adaptability. It can be used for thousands of electronic applications, and using the Linux OS expands the functionality even more. This book helps you get the most from your Raspberry Pi, but it also gives you the fundamental engineering skills you need to incorporate any electronics into any project. Develop the Linux and programming skills you need to build basic applications Build your inventory of parts so you can always "make it work" Understand interfacing, controlling, and communicating with almost any component Explore advanced applications with video, audio, real-world interactions, and more Be free to adapt and create with Exploring Raspberry Pi.

Author : Mike James
Publisher : I/O Press
ISBN 13 : 9781871962659
Total Pages : 276 pages
Book Rating : 4.5X/5 ( download)

DOWNLOAD NOW!

Download or read book Raspberry Pi IoT In Python Using Linux Drivers written by Mike James and published by I/O Press. This book was released on 2021-03-14 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Raspberry Pi makes an ideal match for the Internet of Things. To put it to good use in IoT you need two areas of expertise, electronics and programming, and this presents a barrier to getting started. However, there is an overlooked route that can provide a shortcut. Pi OS, the Raspberry Pi's operating system, is Linux- based and Linux drivers are available for many off-the-shelf IoT devices. These provide a very easy-to-use, high-level, way of working. The problem that this book solves is that there is very little documentation to help you get started. Throughout this book you will find a practical approach to understanding electronic circuits and datasheets and translating this to code, specifically using Python. Python is an excellent language for learning about the IoT or physical computing. It might not be as fast as C, but it is much easier to use for complex data processing. The emphasis in this book is on understanding how things work so that you can apply your new knowledge to your own projects. You can use any Python development system that you know, but the programs in the book have been developed using Visual Studio Code and its remote development facilities. The first IoT program anyone writes is "Blinky" to flash an LED and this book is no exception, but it might not be quite what you expect. Instead of using a GPIO line, it uses the Linux LED driver - no hardware and no fuss. The GPIO isn't left out, however, as the next three chapters focus on its use via the new GPIO character driver, which replaces the old and very common sysfs GPIO driver. This is the way to do modern GPIO. A key component in any look at Linux and its relationship to hardware is the relatively new Device Tree. While most accounts of this resource are aimed at device driver writers, this one is aimed at device driver users and to this end we look at several devices, including the DHT22 temperature and humidity sensor. After a brief detour into some basic electronics, we see how Pulse Width Modulation is supported via a driver. From here we tackle the two standard buses, I2C and SPI, first going through the basics and then looking at the two attempts to impose a higher organization, the hardware monitoring system, Hwmon, and Industrial I/O, IIO. The third standard bus, although generally not supported in hardware, is the 1-Wire bus. This is covered in detail and even includes an introduction to using Netlink, which uses the sockets API to send messages to and from the kernel to access the driver. The final chapter takes things to the next level and considers creating your own custom overlays by writing fragments to the device tree. This is the second title jointly authored by Harry Fairhead and Mike James and can be seen as the alternative approach to that outlined in Raspberry Pi IoT In Python Using GPIO Zero. For both books, Harry brings his expertise in electronics and the IoT and Mike contributes the Python code. Harry Fairhead is the author of other IoT-related titles including Raspberry Pi IoT in C, Second Edition; Micro: bit IoT in C, Second Edition; Applying C For The IoT With Linux and Fundamental C: Getting Closer To The Machine. Mike James is the author of Programmer's Python: Everything is an Object and other programming and computer science titles in the I Programmer Library.

Author : Mike James
Publisher : I/O Press
ISBN 13 : 9781871962871
Total Pages : 0 pages
Book Rating : 4.70/5 ( download)

DOWNLOAD NOW!

Download or read book Raspberry Pi IoT In Python Using GPIO Zero, 2nd Edition written by Mike James and published by I/O Press. This book was released on 2024-02-17 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Raspberry Pi makes an ideal match for the Internet of Things. But to put it to good use in IoT you need two areas of expertise, electronics and programming and because of the way hardware and software engineering tend to occupy separate niches, you may need help with combining the two which is what this book sets out to do. Python is an excellent language for learning about physical computing. It might not be as fast as C, but it is much easier to use for complex data processing. One reason for Python's popularity is its wealth of supporting libraries and there are several for interfacing hardware. The GPIO Zero library is the official way to use Python with the GPIO and other devices and this book looks at how to use it to interface to fundamental IoT devices - from LEDs and buzzers to servos and stepper motors and several off-the-shelf Raspberry Pi add-ons. This revised second edition had been expanded to cover all the current Raspberry Pis including the latest, the Pi 5, and the Pi Zero 2W which, with its WiFi capability and being a quad-core device, is an ideal device for IoT projects. It has also been updated to cover the latest version of the GPIO Zero library, which is both the library recommended by Raspberry Pi and the only one that works with the Pi 5. The emphasis in this book is about using and understanding the hardware and GPIO Zero. It not only shows you how to "follow the beaten track", but how to create your own tracks. While it isn't a project book, many of the code examples described are part way to projects and all of the devices and techniques described can be used to create practical projects. Similarly while it doesn't teach you the whole of Python, it does bring you up to speed in the aspects of the language needed for interfacing with hardware. Harry Fairhead has worked with microprocessors, and electronics in general, for many years and is an enthusiastic proponent of the IoT. He is the author of Raspberry Pi IoT in C, which has recently been republished in its third edition, and Raspberry Pi IoT in C Using Linux Drivers, now in its second edition. Mike James is the co-author Raspberry Pi IoT in Python Using Linux Drivers, Second Edition. He is also the author of the Programmer's Python: Something Completely Different series of books.

Author : Maneesh Rao
Publisher : Packt Publishing Ltd
ISBN 13 : 1788620658
Total Pages : 239 pages
Book Rating : 4.59/5 ( download)

DOWNLOAD NOW!

Download or read book Internet of Things with Raspberry Pi 3 written by Maneesh Rao and published by Packt Publishing Ltd. This book was released on 2018-04-30 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unleash the power of the Raspberry Pi 3 board to create interesting IoT projects Key Features Learn how to interface various sensors and actuators with the Raspberry Pi 3 and send this data to the cloud. Explore the possibilities offered by the IoT by using the Raspberry Pi to upload measurements to Google Docs. A practical guide that will help you create a Raspberry Pi robot using IoT modules. Book Description This book is designed to introduce you to IoT and Raspberry Pi 3. It will help you create interesting projects, such as setting up a weather station and measuring temperature and humidity using sensors; it will also show you how to send sensor data to cloud for visualization in real-time. Then we shift our focus to leveraging IoT for accomplishing complex tasks, such as facial recognition using the Raspberry Pi camera module, AWS Rekognition, and the AWS S3 service. Furthermore, you will master security aspects by building a security surveillance system to protect your premises from intruders using Raspberry Pi, a camera, motion sensors, and AWS Cloud. We'll also create a real-world project by building a Wi-Fi – controlled robot car with Raspberry Pi using a motor driver circuit, DC motor, and a web application. This book is a must-have as it provides a practical overview of IoT’s existing architectures, communication protocols, and security threats at the software and hardware levels—security being the most important aspect of IoT. What you will learn Understand the concept of IoT and get familiar with the features of Raspberry Pi Learn to integrate sensors and actuators with the Raspberry Pi Communicate with cloud and Raspberry using communication protocols such as HTTP and MQTT Build DIY projects using Raspberry Pi, JavaScript/node.js and cloud (AWS) Explore the best practices to ensure the security of your connected devices Who this book is for If you're a developer or electronics engineer and are curious about the Internet of Things, then this is the book for you. With only a rudimentary understanding of electronics, the Raspberry Pi, or similar credit-card sized computers, and some programming experience, you will be taught to develop state-of-the-art solutions for the Internet of Things in an instant.