Optimization Of Multistage Hydraulic Fracturing Treatment For Maximization Of The Tight Gas Productivity

Author : Mengting Li
Publisher : Cuvillier Verlag
ISBN 13 : 3736989342
Total Pages : 208 pages
Book Rating : 4.44/5 ( download)

DOWNLOAD NOW!

Download or read book Optimization of Multistage Hydraulic Fracturing Treatment for Maximization of the Tight Gas Productivity written by Mengting Li and published by Cuvillier Verlag. This book was released on 2018-12-17 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydraulic fracturing is essential technology for the development of unconventional resources such as tight gas. So far, there are no numerical tools which can optimize the whole process from geological modeling, hydraulic fracturing until production simulation with the same 3D model with consideration of the thermo-hydro-mechanical coupling. In this dissertation, a workflow and a numerical tool chain were developed for design and optimization of multistage hydraulic fracturing in horizontal well regarding a maximum productivity of the tight gas wellbore. After the verification a full 3D reservoir model is generated based on a real tight gas field in the North German Basin. Through analysis of simulation results, a new calculation formula of FCD was proposed, which takes the proppant position and concentration into account and can predict the gas production rate more accurately. However, not only FCD but also proppant distribution and hydraulic connection of stimulated fractures to the well, geological structure and the interaction between fractures are determinant for the gas production volume. Through analysis the numerical results of sensitivity analysis and optimization variations, there is no unique criterion to determine the optimal number and spacing of the fractures, it should be analyzed firstly in detail to the actual situation and decided then from case to case.

Author : Wentao Feng
Publisher : Cuvillier Verlag
ISBN 13 : 3736961707
Total Pages : 204 pages
Book Rating : 4.08/5 ( download)

DOWNLOAD NOW!

Download or read book Numerical study of the stimulation related thermo-hydro-mechanical processes in tight gas and deep geothermal reservoirs written by Wentao Feng and published by Cuvillier Verlag. This book was released on 2020-03-05 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydraulic fracturing in combination with horizontal well is playing a key role in the efficient development of unconventional gas/oil reservoirs and deep geothermal resources. However, the integral operation, especially from the perspective of THM (Thermal-Hydraulic-Mechanic) interactions have not been studied systematically. In this thesis, targeted improvements were achieved through developing a series of mathematical/physical models, and their implementation into the existing numerical tools (FLAC3Dplus and TOUGH2MP-FLAC3D), including: (a) a new thermal module for FLAC3Dplus based entirely on the finite volume method (FVM), which is especially developed for the fracturing process and can also achieve the modeling of gel breaking; (b) a rock damage module of TOUGH2MP-FLAC3D, which also considers the impacts of rock damaging process on evolution of permeability; (c) an in-depth improved FLAC3Dplus simulator that obtains the ability to simulate a 3D fracture propagation with arbitrary orientation. After the corresponding verifications, the improved tools were applied in different case studies to reveal: a) influences of the fluid’s viscosity on the fracturing results in tight sandstone reservoirs; b) the induced seismicity during the fracturing operation and the reactivation of the natural faults; and c) the fracture propagation with arbitrary orientation.

Author :
Publisher :
ISBN 13 :
Total Pages : pages
Book Rating : 4.75/5 ( download)

DOWNLOAD NOW!

Download or read book Advanced Hydraulic Fracturing Technology for Unconventional Tight Gas Reservoirs written by and published by . This book was released on 2007 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The objectives of this project are to develop and test new techniques for creating extensive, conductive hydraulic fractures in unconventional tight gas reservoirs by statistically assessing the productivity achieved in hundreds of field treatments with a variety of current fracturing practices ranging from 'water fracs' to conventional gel fracture treatments; by laboratory measurements of the conductivity created with high rate proppant fracturing using an entirely new conductivity test - the 'dynamic fracture conductivity test'; and by developing design models to implement the optimal fracture treatments determined from the field assessment and the laboratory measurements. One of the tasks of this project is to create an 'advisor' or expert system for completion, production and stimulation of tight gas reservoirs. A central part of this study is an extensive survey of the productivity of hundreds of tight gas wells that have been hydraulically fractured. We have been doing an extensive literature search of the SPE eLibrary, DOE, Gas Technology Institute (GTI), Bureau of Economic Geology and IHS Energy, for publicly available technical reports about procedures of drilling, completion and production of the tight gas wells. We have downloaded numerous papers and read and summarized the information to build a database that will contain field treatment data, organized by geographic location, and hydraulic fracture treatment design data, organized by the treatment type. We have conducted experimental study on 'dynamic fracture conductivity' created when proppant slurries are pumped into hydraulic fractures in tight gas sands. Unlike conventional fracture conductivity tests in which proppant is loaded into the fracture artificially; we pump proppant/frac fluid slurries into a fracture cell, dynamically placing the proppant just as it occurs in the field. From such tests, we expect to gain new insights into some of the critical issues in tight gas fracturing, in particular the roles of gel damage, polymer loading (water-frac versus gel frac), and proppant concentration on the created fracture conductivity. To achieve this objective, we have designed the experimental apparatus to conduct the dynamic fracture conductivity tests. The experimental apparatus has been built and some preliminary tests have been conducted to test the apparatus.

Author : Tatyana Plaksina
Publisher :
ISBN 13 :
Total Pages : pages
Book Rating : 4.42/5 ( download)

DOWNLOAD NOW!

Download or read book Automated Optimization Strategies for Horizontal Wellbore and Hydraulic Fracture Stages Placement in Unconventional Gas Reseroirs written by Tatyana Plaksina and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last decades rapid advances in horizontal drilling and hydraulic fracturing technologies ensure production of commercial quantities of natural gas from many unconventional reservoirs. Reservoir management and development strategies for shale and tight gas plays have evolved from ad hoc approaches to more rigorous strategies that involve numerical optimization in presence of multiple economic and production objectives and constraints. Application of an automated integrated optimization framework for placement of horizontal wellbores and transverse hydraulic fracture stages along them has potential of increasing shale gas reserves and projects' revenue even further. This dissertation introduces a novel integrated evolutionary-based optimization framework for placement of horizontal wellbores and hydraulic fracture stages that allows enhancing production from shale gas formations and provides a solid foundation for future field-scale application once better understanding of shale petrophysics and geomechanics is developed. The proposed optimization workflow is developed and tested in stages. First, we summarize what has been done in the subject field previously by scholars and identify what is missing. Second, we present assumptions for the shale gas simulation model that make our framework and the simulation model applicable. Third, we pre-screen several economic and petrophysical parameters in order to identify the most significant for the subsequent sensitivities analysis. Forth, we develop evolutionary-based optimization strategy for placement of hydraulic fracture stages along a single horizontal wellbore. We investigate how sensitive the optimization results to changes in the key parameters pre-selected during pre-screening. Fifth, we enhance the framework to handle multiple horizontal producers, discuss the conditions when such approach is applicable, and extensively test this integrated workflow on a suite of simulation runs. Finally, we implement and apply multi-objective optimization approach (the improved non-dominated sorting genetic algorithm) to the problem of optimal HF stage placement in shale gas reservoirs and analyze the efficiency of our evolutionary-based optimization scheme in presence of multiple conflicting or non-conflicting objectives. Based on our extensive testing and rigorous formulation of the optimization problem, we find that the chosen evolutionary framework is effective in calculating the optimal number of horizontal wells, the number of HF stages, their specific locations along the wells as well as their half-length. We also conclude that further computational efficiency can be achieved if minimum stage spacing and same chromosome elimination procedure are used. The multi-objective approach has been tested on conflicting and non-conflicting objectives and proved to compute the Pareto optimal front of solutions (or production scenarios) in computationally efficient manner. The electronic version of this dissertation is accessible from http://hdl.handle.net/1969.1/155086

Author : Kenneth Imo-Imo Israel Eshiet
Publisher :
ISBN 13 : 1838811079
Total Pages : 152 pages
Book Rating : 4.75/5 ( download)

DOWNLOAD NOW!

Download or read book Exploitation of Unconventional Oil and Gas Resources written by Kenneth Imo-Imo Israel Eshiet and published by . This book was released on 2019-07-10 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: The stimulation of unconventional hydrocarbon reservoirs is proven to improve their productivity to an extent that has rendered them economically viable. Generally, the stimulation design is a complex process dependent on intertwining factors such as the history of the formation, rock and reservoir fluid type, lithology and structural layout of the formation, cost, time, etc. A holistic grasp of these can be daunting, especially for people without sufficient experience and/or expertise in the exploitation of unconventional hydrocarbon reserves. This book presents the key facets integral to producing unconventional resources, and how the different components, if pieced together, can be used to create an integrated stimulation design. Areas covered are as follows: • stimulation methods, • fracturing fluids, • mixing and behavior of reservoir fluids, • assessment of reservoir performance, • integration of surface drilling data, • estimation of geomechanical properties and hydrocarbon saturation, and • health and safety. Exploitation of Unconventional Oil and Gas Resources: Hydraulic Fracturing and Other Recovery and Assessment Techniques is an excellent introduction to the subject area of unconventional oil and gas reservoirs, but it also complements existing information in the same discipline. It is an essential text for higher education students and professionals in academia, research, and the industry.

Author : Michael J. Economides
Publisher :
ISBN 13 : 9781604616880
Total Pages : 509 pages
Book Rating : 4.81/5 ( download)

DOWNLOAD NOW!

Download or read book Modern Fracturing written by Michael J. Economides and published by . This book was released on 2007 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Natural gas is rapidly emerging as a premier fuel for the world economy with markedly increasing trans-national trade. With proven reserves far exceeding those for crude oil, natural gas is likely to be around for centuries. This is a book about enhancing natural gas production using one of the most important and widespread well completion technologies -- hydraulic fracturing. The book addresses the way that natural gas is produced from reservoirs and then describes diagnostic techniques that can pinpoint whether the well is producing as it should or whether intervention should be undertaken, which is the central theme of this book."--Back cover.

Author : Usman Ahmed
Publisher : CRC Press
ISBN 13 : 1498759416
Total Pages : 862 pages
Book Rating : 4.10/5 ( download)

DOWNLOAD NOW!

Download or read book Unconventional Oil and Gas Resources written by Usman Ahmed and published by CRC Press. This book was released on 2016-04-05 with total page 862 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the shale revolution continues in North America, unconventional resource markets are emerging on every continent. In the next eight to ten years, more than 100,000 wells and one- to two-million hydraulic fracturing stages could be executed, resulting in close to one trillion dollars in industry spending. This growth has prompted professionals ex

Author : Abdul Muqtadir Khan
Publisher :
ISBN 13 :
Total Pages : 234 pages
Book Rating : 4.18/5 ( download)

DOWNLOAD NOW!

Download or read book Multi-frac Treatments in Tight Oil and Shale Gas Reservoirs written by Abdul Muqtadir Khan and published by . This book was released on 2013 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: The vast shale gas and tight oil reservoirs in North America cannot be economically developed without multi-stage hydraulic fracture treatments. Owing to the disparity in the density of natural fractures in addition to the disparate in-situ stress conditions in these kinds of formations, microseismic fracture mapping has shown that hydraulic fracture treatments develop a range of large-scale fracture networks in the shale plays. In this thesis, an approach is presented, where the fracture networks approximated with microseismic mapping are integrated with a commercial numerical production simulator that discretely models the network structure in both vertical and horizontal wells. A novel approach for reservoir simulation is used, where porosity (instead of permeability) is used as a scaling parameter for the fracture width. Two different fracture geometries have been broadly proposed for a multi stage horizontal well, orthogonal and transverse. The orthogonal pattern represents a complex network with cross cutting fractures orthogonal to each other; whereas transverse pattern maps uninterrupted fractures achieving maximum depth of penetration into the reservoir. The response for a single-stage fracture is further investigated by comparing the propagation of the stage to be dendritic versus planar. A dendritic propagation is bifurcation of the hydraulic fracture due to intersection with the natural fracture (failure along the plane of weakness). The impact of fracture spacing to optimize these fracture geometries is studied. A systematic optimization for designing the fracture length and width is also presented. The simulation is motivated by the oil window of Eagle Ford shale formation and the results of this work illustrate how different fracture network geometries impact well performance, which is critical for improving future horizontal well completions and fracturing strategies in low permeability shale and tight oil reservoirs. A rate transient analysis (RTA) technique employing a rate normalized pressure (RNP) vs. superposition time function (STF) plot is used for the linear flow analysis. The parameters that influence linear flow are analytically derived. It is found that picking a straight line on this curve can lead to erroneous results because multiple solutions exist. A new technique for linear flow analysis is used. The ratio of derivative of inverse production and derivative of square root time is plotted against square root time and the constant derivative region is seen to be indicative of linear flow. The analysis is found to be robust because different simulation cases are modeled and permeability and fracture half-length are estimated.

Author : Xiaodan Ma
Publisher :
ISBN 13 :
Total Pages : pages
Book Rating : 4.08/5 ( download)

DOWNLOAD NOW!

Download or read book Integrated Hydraulic Fracture Placement and Design Optimization in Unconventional Gas Reservoirs written by Xiaodan Ma and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Unconventional reservoir such as tight and shale gas reservoirs has the potential of becoming the main source of cleaner energy in the 21th century. Production from these reservoirs is mainly accomplished through engineered hydraulic fracturing to generate fracture networks that provide the gas flow pathways from the rock matrix to the production wells. While hydraulic fracturing technology has progressed considerably in the last thirty years, designing the fracturing system primarily involves judgments from a team of engineers, geoscientists and geophysicists, without taking advantage of computational tools, such as numerical optimization techniques to improve short-term and long-term reservoir production. This thesis focuses on developing novel optimization algorithms that can be used to improve the design and implementation of hydraulic fracturing in a shale gas reservoir to increase production and the net present value of unconventional assets. In particular, we consider simultaneous perturbation stochastic approximation (SPSA) and Covariance Matrix Adaptation - Evolution Strategy (CMA-ES) algorithms, which are proven very efficient in finding nearly optimal solutions. We show that with a judicious choice of control variables (continuous or discrete) we can obtain efficient algorithms for performing hydraulic fracture optimization in unconventional reservoirs. To achieve this, the hydraulic fracture production optimization problem is divided into two aspects: fracture stages placement optimization with fix stage numbers and unknown stage numbers. After check the parameters of fracture model that could be used to simulate future reservoir behavior with a higher degree of confidence, the fracture stages optimization is scheduling the fracturing sequence, and adjusting the fracture stages intensity at different locations, which is similar to well placement problem. In addition to the detailed investigation of the new optimization technique, uncertainty quantification of reservoir properties and its implications on the optimization workflow is also considered in the shale gas reservoir model. Taking into account that shale gas reservoirs are highly heterogeneous systems, stochastic optimization methods are the most suitable framework for hydraulic fracture stages placement. The electronic version of this dissertation is accessible from http://hdl.handle.net/1969.1/151913

Author : Y Zee Ma
Publisher : Gulf Professional Publishing
ISBN 13 : 0128025360
Total Pages : 552 pages
Book Rating : 4.69/5 ( download)

DOWNLOAD NOW!

Download or read book Unconventional Oil and Gas Resources Handbook written by Y Zee Ma and published by Gulf Professional Publishing. This book was released on 2015-10-06 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unconventional Oil and Gas Resources Handbook: Evaluation and Development is a must-have, helpful handbook that brings a wealth of information to engineers and geoscientists. Bridging between subsurface and production, the handbook provides engineers and geoscientists with effective methodology to better define resources and reservoirs. Better reservoir knowledge and innovative technologies are making unconventional resources economically possible, and multidisciplinary approaches in evaluating these resources are critical to successful development. Unconventional Oil and Gas Resources Handbook takes this approach, covering a wide range of topics for developing these resources including exploration, evaluation, drilling, completion, and production. Topics include theory, methodology, and case histories and will help to improve the understanding,integrated evaluation, and effective development of unconventional resources. Presents methods for a full development cycle of unconventional resources, from exploration through production Explores multidisciplinary integrations for evaluation and development of unconventional resources and covers a broad range of reservoir characterization methods and development scenarios Delivers balanced information with multiple contributors from both academia and industry Provides case histories involving geological analysis, geomechanical analysis, reservoir modeling, hydraulic fracturing treatment, microseismic monitoring, well performance and refracturing for development of unconventional reservoirs