Fundamentals Of Electronics Book 4 Oscillators And Advanced Electronics

Author : Thomas F. Schubert Jr.
Publisher : Springer Nature
ISBN 13 : 3031798864
Total Pages : 252 pages
Book Rating : 4.63/5 ( download)

DOWNLOAD NOW!

Download or read book Fundamentals of Electronics written by Thomas F. Schubert Jr. and published by Springer Nature. This book was released on 2022-06-01 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, Oscillators and Advanced Electronics Topics, is the final book of a larger, four-book set, Fundamentals of Electronics. It consists of five chapters that further develop practical electronic applications based on the fundamental principles developed in the first three books. This book begins by extending the principles of electronic feedback circuits to linear oscillator circuits. The second chapter explores non-linear oscillation, waveform generation, and waveshaping. The third chapter focuses on providing clean, reliable power for electronic applications where voltage regulation and transient suppression are the focus. Fundamentals of communication circuitry form the basis for the fourth chapter with voltage-controlled oscillators, mixers, and phase-lock loops being the primary focus. The final chapter expands upon early discussions of logic gate operation (introduced in Book 1) to explore gate speed and advanced gate topologies. Fundamentals of Electronics has been designed primarily for use in upper division courses in electronics for electrical engineering students and for working professionals. Typically such courses span a full academic year plus an additional semester or quarter. As such, Oscillators and Advanced Electronics Topics and the three companion book of Fundamentals of Electronics form an appropriate body of material for such courses.

Author : Thomas Schubert
Publisher : I K International Pvt Ltd
ISBN 13 : 938590924X
Total Pages : 265 pages
Book Rating : 4.45/5 ( download)

DOWNLOAD NOW!

Download or read book Fundamentals of Electronics Book 4: (Oscillators and Advanced Electronics) written by Thomas Schubert and published by I K International Pvt Ltd. This book was released on 2017-02-16 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Book, Oscillators and Advanced Electronics Topics, is the final book of a larger, four-book set, Fundamentals of Electronics. It consists of five chapters that further develop practical electronic applications based on the fundamental principles developed in the first three books. This book begins by extending the principles of electronic feedback circuits to linear oscillator circuits. The second chapter explores non-linear oscillation, waveform generation, and waveshaping. The third chapter focuses on providing clean, reliable power for electronic applications where voltage regulation and transient suppression are the focus. Fundamentals of communication circuitry form the basis for the fourth chapter with voltage-controlled oscillators, mixers, and phase-lock loops being the primary focus. The final chapter expands upon early discussions of logic gate operation (introduced in Book 1) to explore gate speed and advanced gate topologies. Fundamentals of Electronics has been designed primarily for use in an upper division course in electronics for electrical engineering students and for working professionals. Typically such a course spans a full academic year consisting of two smesters or three quarters. As such, Oscillators and Advanced Electronic Topics, and the first three books in the series, Electronic Devices and Circuit Applications (ISBN 978-93-85909-21-4), Amplifiers: Analysis and Design (ISBN 978-93-85909-22-1), and Active Filters and Amplifier Frequency Response (ISBN 978-93-85909-23-8) form an appropriate body of material for such course.

Author : Thomas F. Schubert
Publisher : Morgan & Claypool Publishers
ISBN 13 : 1627055630
Total Pages : 320 pages
Book Rating : 4.35/5 ( download)

DOWNLOAD NOW!

Download or read book Fundamentals of Electronics: Book 1 written by Thomas F. Schubert and published by Morgan & Claypool Publishers. This book was released on 2015-05-01 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, Electronic Devices and Circuit Application, is the first of four books of a larger work, Fundamentals of Electronics. It is comprised of four chapters describing the basic operation of each of the four fundamental building blocks of modern electronics: operational amplifiers, semiconductor diodes, bipolar junction transistors, and field effect transistors. Attention is focused on the reader obtaining a clear understanding of each of the devices when it is operated in equilibrium. Ideas fundamental to the study of electronic circuits are also developed in the book at a basic level to lessen the possibility of misunderstandings at a higher level. The difference between linear and non-linear operation is explored through the use of a variety of circuit examples including amplifiers constructed with operational amplifiers as the fundamental component and elementary digital logic gates constructed with various transistor types. Fundamentals of Electronics has been designed primarily for use in an upper division course in electronics for electrical engineering students. Typically such a course spans a full academic years consisting of two semesters or three quarters. As such, Electronic Devices and Circuit Applications, and the following two books, Amplifiers: Analysis and Design and Active Filters and Amplifier Frequency Response, form an appropriate body of material for such a course. Secondary applications include the use in a one-semester electronics course for engineers or as a reference for practicing engineers.

Author : Tsutomu Sasao
Publisher : Springer Nature
ISBN 13 : 3031799119
Total Pages : 165 pages
Book Rating : 4.12/5 ( download)

DOWNLOAD NOW!

Download or read book Index Generation Functions written by Tsutomu Sasao and published by Springer Nature. This book was released on 2022-05-31 with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt: Index generation functions are binary-input integer valued functions. They represent functions of content addressable memories (CAMs). Applications include: IP address tables; terminal controllers; URL lists; computer virus scanning circuits; memory patch circuits; list of English words; code converters; and pattern matching circuits. This book shows memory-based realization of index generation functions. It shows: 1. methods to implement index generation functions by look-up table (LUT) cascades and index generation units (IGU), 2. methods to reduce the number of variables using linear transformations, and 3. methods to estimate the sizes of memories, with many illustrations, tables, examples, exercises, and their solutions.

Author : Dung Dang
Publisher : Springer Nature
ISBN 13 : 3031798899
Total Pages : 545 pages
Book Rating : 4.94/5 ( download)

DOWNLOAD NOW!

Download or read book Embedded Systems Design with the Texas Instruments MSP432 32-bit Processor written by Dung Dang and published by Springer Nature. This book was released on 2022-06-01 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a thorough introduction to the Texas Instruments MPS432TM microcontroller. The MPS432 is a 32-bit processor with the ARM Cortex M4F architecture and a built-in floating point unit. At the core, the MSP432 features a 32-bit ARM Cortex-M4F CPU, a RISC-architecture processing unit that includes a built-in DSP engine and a floating point unit. As an extension of the ultra-low-power MSP microcontroller family, the MSP432 features ultra-low power consumption and integrated digital and analog hardware peripherals. The MSP432 is a new member to the MSP family. It provides for a seamless transition to applications requiring 32-bit processing at an operating frequency of up to 48 MHz. The processor may be programmed at a variety of levels with different programming languages including the user-friendly Energia rapid prototyping platform, in assembly language, and in C. A number of C programming options are also available to developers, starting with register-level access code where developers can directly configure the device's registers, to Driver Library, which provides a standardized set of application program interfaces (APIs) that enable software developers to quickly manipulate various peripherals available on the device. Even higher abstraction layers are also available, such as the extremely user-friendly Energia platform, that enables even beginners to quickly prototype an application on MSP432. The MSP432 LaunchPad is supported by a host of technical data, application notes, training modules, and software examples. All are encapsulated inside one handy package called MSPWare, available as both a stand-alone download package as well as on the TI Cloud development site: dev.ti.com The features of the MSP432 may be extended with a full line of BoosterPack plug-in modules. The MSP432 is also supported by a variety of third party modular sensors and software compiler companies. In the back, a thorough introduction to the MPS432 line of microcontrollers, programming techniques, and interface concepts are provided along with considerable tutorial information with many illustrated examples. Each chapter provides laboratory exercises to apply what has been presented in the chapter. The book is intended for an upper level undergraduate course in microcontrollers or mechatronics but may also be used as a reference for capstone design projects. Practicing engineers already familiar with another microcontroller, who require a quick tutorial on the microcontroller, will also find this book very useful. Finally, middle school and high school students will find the MSP432 highly approachable via the Energia rapid prototyping system.

Author : Steven F. Barrett
Publisher : Springer Nature
ISBN 13 : 3031799194
Total Pages : 269 pages
Book Rating : 4.98/5 ( download)

DOWNLOAD NOW!

Download or read book Arduino II written by Steven F. Barrett and published by Springer Nature. This book was released on 2022-06-01 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is about the Arduino microcontroller and the Arduino concept. The visionary Arduino team of Massimo Banzi, David Cuartielles, Tom Igoe, Gianluca Martino, and David Mellis launched a new innovation in microcontroller hardware in 2005, the concept of open-source hardware. Their approach was to openly share details of microcontroller-based hardware design platforms to stimulate the sharing of ideas and promote innovation. This concept has been popular in the software world for many years. In June 2019, Joel Claypool and I met to plan the fourth edition of Arduino Microcontroller Processing for Everyone! Our goal has been to provide an accessible book on the rapidly evolving world of Arduino for a wide variety of audiences including students of the fine arts, middle and senior high school students, engineering design students, and practicing scientists and engineers. To make the book even more accessible to better serve our readers, we decided to change our approach and provide a series of smaller volumes. Each volume is written to a specific audience. This book, Arduino II: Systems, is a detailed treatment of the ATmega328 processor and an introduction to C programming and microcontroller-based systems design. Arduino I: Getting Started provides an introduction to the Arduino concept. Arduino III: the Internet of Things explores Arduino applications in the Internet of Things (IoT).

Author : Steven F. Barrett
Publisher : Springer Nature
ISBN 13 : 3031799151
Total Pages : 202 pages
Book Rating : 4.50/5 ( download)

DOWNLOAD NOW!

Download or read book Arduino I written by Steven F. Barrett and published by Springer Nature. This book was released on 2022-05-31 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is about the Arduino microcontroller and the Arduino concept. The visionary Arduino team of Massimo Banzi, David Cuartielles, Tom Igoe, Gianluca Martino, and David Mellis launched a new innovation in microcontroller hardware in 2005, the concept of open-source hardware. Their approach was to openly share details of microcontroller-based hardware design platforms to stimulate the sharing of ideas and promote innovation. This concept has been popular in the software world for many years. In June 2019, Joel Claypool and I met to plan the fourth edition of Arduino Microcontroller Processing for Everyone! Our goal has been to provide an accessible book on the rapidly changing world of Arduino for a wide variety of audiences including students of the fine arts, middle and senior high school students, engineering design students, and practicing scientists and engineers. To make the book more accessible to better serve our readers, we decided to change our approach and provide a series of smaller volumes. Each volume is written to a specific audience. This book, Arduino I: Getting Started is written for those looking for a quick tutorial on the Arduino environment, platforms, interface techniques, and applications. Arduino II will explore advanced techniques, applications, and systems design. Arduino III will explore Arduino applications in the Internet of Things (IoT). Arduino I: Getting Started covers three different Arduino products: the Arduino UNO R3 equipped with the Microchip ATmega328, the Arduino Mega 2560 equipped with the Microchip ATmega2560, and the wearable Arduino LilyPad.

Author : Steven F. Barrett
Publisher : Springer Nature
ISBN 13 : 3031799232
Total Pages : 217 pages
Book Rating : 4.35/5 ( download)

DOWNLOAD NOW!

Download or read book Arduino III written by Steven F. Barrett and published by Springer Nature. This book was released on 2022-05-31 with total page 217 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is about the Arduino microcontroller and the Arduino concept. The visionary Arduino team of Massimo Banzi, David Cuartielles, Tom Igoe, Gianluca Martino, and David Mellis launched a new innovation in microcontroller hardware in 2005, the concept of open-source hardware. Their approach was to openly share details of microcontroller-based hardware design platforms to stimulate the sharing of ideas and promote innovation. This concept has been popular in the software world for many years. In June 2019, Joel Claypool and I met to plan the fourth edition of Arduino Microcontroller Processing for Everyone! Our goal has been to provide an accessible book on the rapidly evolving world of Arduino for a wide variety of audiences including students of the fine arts, middle and senior high school students, engineering design students, and practicing scientists and engineers. To make the book even more accessible to better serve our readers, we decided to change our approach and provide a series of smaller volumes. Each volume is written to a specific audience. This book, Arduino III: Internet of Things, explores Arduino applications in the fascinating and rapidly evolving world of the Internet of Things. Arduino I: Getting Started provides an introduction to the Arduino concept. Arduino II: Systems, is a detailed treatment of the ATmega328 processor and an introduction to C programming and microcontroller-based systems design.

Author : Farzin Asadi
Publisher : Springer Nature
ISBN 13 : 3031799275
Total Pages : 169 pages
Book Rating : 4.73/5 ( download)

DOWNLOAD NOW!

Download or read book Programming the ARM® Cortex®-M4-based STM32F4 Microcontrollers with Simulink® written by Farzin Asadi and published by Springer Nature. This book was released on 2022-05-31 with total page 169 pages. Available in PDF, EPUB and Kindle. Book excerpt: A microcontroller is a compact, integrated circuit designed to govern a specific operation in an embedded system. A typical microcontroller includes a processor, memory, and input/output (I/O) peripherals on a single chip. When they first became available, microcontrollers solely used Assembly language. Today, the C programming language (and some other high-level languages) can be used as well. Some of advanced microcontrollers support another programming technique as well: Graphical programming. In graphical programming, the user does not write any code but draws the block diagram of the system he wants. Then a software converts the drawn block diagram into a suitable code for the target device. Programming microcontrollers using graphical programming is quite easier than programming in C or Assembly. You can implement a complex system within hours with graphical programming while its implementation in C may take months. These features make the graphical programming an important option for engineers. This book study the graphical programming of STM32F4 high-performance microcontrollers with the aid of Simulink\textregistered\ and Waijung blockset. Students of engineering (for instance, electrical, biomedical, mechatronics and robotic to name a few), engineers who work in industry, and anyone who want to learn the graphical programming of STM32F4 can benefit from this book. Prerequisite for this book is the basic knowledge of MATLABi\textregistered/Simulink\textregistered.

Author : Bernd Steinbach
Publisher : Springer Nature
ISBN 13 : 3031798929
Total Pages : 203 pages
Book Rating : 4.24/5 ( download)

DOWNLOAD NOW!

Download or read book Boolean Differential Calculus written by Bernd Steinbach and published by Springer Nature. This book was released on 2022-05-31 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Boolean Differential Calculus (BDC) is a very powerful theory that extends the basic concepts of Boolean Algebras significantly. Its applications are based on Boolean spaces and n, Boolean operations, and basic structures such as Boolean Algebras and Boolean Rings, Boolean functions, Boolean equations, Boolean inequalities, incompletely specified Boolean functions, and Boolean lattices of Boolean functions. These basics, sometimes also called switching theory, are widely used in many modern information processing applications. The BDC extends the known concepts and allows the consideration of changes of function values. Such changes can be explored for pairs of function values as well as for whole subspaces. The BDC defines a small number of derivative and differential operations. Many existing theorems are very welcome and allow new insights due to possible transformations of problems. The available operations of the BDC have been efficiently implemented in several software packages. The common use of the basic concepts and the BDC opens a very wide field of applications. The roots of the BDC go back to the practical problem of testing digital circuits. The BDC deals with changes of signals which are very important in applications of the analysis and the synthesis of digital circuits. The comprehensive evaluation and utilization of properties of Boolean functions allow, for instance, to decompose Boolean functions very efficiently; this can be applied not only in circuit design, but also in data mining. Other examples for the use of the BDC are the detection of hazards or cryptography. The knowledge of the BDC gives the scientists and engineers an extended insight into Boolean problems leading to new applications, e.g., the use of Boolean lattices of Boolean functions.