Computer Methods And Experimental Measurements For Surface Effects And Contact Mechanics Viii

Author : J. T. M. de Hosson
Publisher : WIT Press
ISBN 13 : 184564073X
Total Pages : 353 pages
Book Rating : 4.36/5 ( download)

DOWNLOAD NOW!

Download or read book Computer Methods and Experimental Measurements for Surface Effects and Contact Mechanics VIII written by J. T. M. de Hosson and published by WIT Press. This book was released on 2007 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: The importance of contact and surface problems in modern engineering and their combined effects has led to the Eighth International Conference on Computer Methods and Experimental Measurements for Surface and Contact Mechanics. Nowadays the importance of contact and surface problems in many technological fields is well understood: they are complex and inherently non-linear due to their moving boundaries and the different properties of materials, particularly along the contact surfaces. Structural components fail from wear, corrosion, high cycle fatigue etc., that is to say affected and initiated by the surface conditions. The use of surface treatments can reduce the cost of components and extend the life of the elements. Their effect is of particular importance in the case of surfaces undergoing contact, a problem which is addressed throughout the book. Topics featured: Surface Treatment; Surface problems in Contact Mechanics; Fracture Mechanics; Coupled analysis and experiments; Thin Coatings; Thick Coatings; Contact Mechanics; Material Surface in Contact; Applications and Case Studies.

Author : J. T. M. de Hosson
Publisher : Computational Mechanics
ISBN 13 : 9781845640224
Total Pages : 0 pages
Book Rating : 4.25/5 ( download)

DOWNLOAD NOW!

Download or read book Computer Methods and Experimental Measurements for Surface Effects and Contact Mechanics VII written by J. T. M. de Hosson and published by Computational Mechanics. This book was released on 2005 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The research activities in the field of surface engineering have been greatly driven by the realization that the surface is usually the most important part of any engineering component. The scientific research featured deals with fundamental and applied concepts of surface engineering, in particular focusing on the interplay between applied physics, materials science and engineering, computational mechanics and mechanical engineering. The book is devoted to fundamental and applied studies of four interconnected aspects: processing, microstructural features, functional performance as well as the design of an appropriate theoretical and predictive framework of protective surfaces.

Author : J. T. M. de Hosson
Publisher : Computational Mechanics
ISBN 13 : 9781845640224
Total Pages : 424 pages
Book Rating : 4.25/5 ( download)

DOWNLOAD NOW!

Download or read book Computer Methods and Experimental Measurements for Surface Effects and Contact Mechanics VII written by J. T. M. de Hosson and published by Computational Mechanics. This book was released on 2005 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: The research activities in the field of surface engineering have been greatly driven by the realization that the surface is usually the most important part of any engineering component. The scientific research featured deals with fundamental and applied concepts of surface engineering, in particular focusing on the interplay between applied physics, materials science and engineering, computational mechanics and mechanical engineering. The book is devoted to fundamental and applied studies of four interconnected aspects: processing, microstructural features, functional performance as well as the design of an appropriate theoretical and predictive framework of protective surfaces.

Author : J. T. M. De Hosson
Publisher : WIT Press
ISBN 13 : 1845645308
Total Pages : 321 pages
Book Rating : 4.04/5 ( download)

DOWNLOAD NOW!

Download or read book Surface Effects and Contact Mechanics X written by J. T. M. De Hosson and published by WIT Press. This book was released on 2011 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contact mechanics and surface effects, as well as their interaction, are important in modern engineering. The life and performance of structural components is affected by surface conditions such as wear, corrosion and, high cycle fatigue. Surface treatments that address contact conditions can reduce costs by extending the life of components. These are the subjects of a biennial conference first held in 1993, the papers from the latest of which are collected in this volume. The book discusses Computer simulation; Surface modification; Surface treatments; Surface problems in contact mechanics; Contact mechanics; Applications and case studies; Indentation and hardness; Thick and thin coatings; Corrosion problems; Nano-characterisation; Test methodology; Multiscale experiments and modelling; and Fracture fatigue and mechanics.

Author : J. T. M. de Hosson
Publisher : WIT Press
ISBN 13 : 1845641868
Total Pages : 289 pages
Book Rating : 4.63/5 ( download)

DOWNLOAD NOW!

Download or read book Surface Effects and Contact Mechanics IX written by J. T. M. de Hosson and published by WIT Press. This book was released on 2009 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Experiments, and discusses the following topics: Surface treatments; Thick coatings; Thin coatings; Surface problems in contact mechanics; Indentation and hardness; Fatigue; Numerical analysis; Applications and case studies." --Book Jacket.

Author : C. A. Brebbia
Publisher : WIT Press
ISBN 13 : 1845640802
Total Pages : 465 pages
Book Rating : 4.04/5 ( download)

DOWNLOAD NOW!

Download or read book Computational Methods and Experiments in Materials Characterization III written by C. A. Brebbia and published by WIT Press. This book was released on 2007 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: Until recently, engineering materials could be characterized successfully using relatively simple testing procedures. As materials technology advances, interest is growing in materials possessing complex meso-, micro- and nano-structures, which to a large extent determine their physical properties and behaviour. The purposes of materials modelling are many: optimization, investigation of failure, simulation of production processes, to name but a few. Modelling and characterisation are closely intertwined, increasingly so as the complexity of the material increases. Characterisation, in essence, is the connection between the abstract material model and the real-world behaviour of the material in question. Characterisation of complex materials therefore may require a combination of experimental techniques and computation. This book publishes papers presented at the Third International Conference on Computational Methods and Experiments in Material Characterisation.Topics covered include: Composites; Ceramics; Alloys; Cements and Cement Based Materials; Biomaterials; Thin Films and Coatings; Advanced Materials; Imaging Analysis; Thermal Analysis; New Methods; Surface Chemistry, Nano Indentation; Continuum Methods; Particle Models; Damage Mechanics; Innovative Techniques; Stochastic Methods.

Author : V.G. DeGiorgi
Publisher : WIT Press
ISBN 13 : 1845640713
Total Pages : 369 pages
Book Rating : 4.12/5 ( download)

DOWNLOAD NOW!

Download or read book Simulation of Electrochemical Processes II written by V.G. DeGiorgi and published by WIT Press. This book was released on 2007-04-10 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains papers presented at the Second International Conference in this successful series, which presents and discusses the state-of-the-art on the computer simulation of corrosion, electrochemical processes and the electrical and electromagnetic fields associated with them.Modern industry applies a wide range of electrochemical processes to protect against corrosion, provide surface treatments and to manufacture products. This book focuses on the computer modelling of these industrial processes and techniques by examining the developments of computational models and their application in practice.Featured topics include: Cathodic Protection Systems; Modelling Methodologies; Electrodeposition and Electroforming; Modelling of Coatings; Modelling Stress Corrosion, Cracking and Corrosion Fatigue; Modelling and Corrosion of Surface Coatings; Interference and Signature Control; Anodic Protection; Electrocoating and Plating; Optimisation of Control Systems; Detection and Monitoring of Corrosion; Measurement Techniques; Fuel on Photovoltaic Cells; Electrolysis Reactors; Comparison of Experimental Measurements and Computer results, Case Studies.

Author : Jonathan R. Lawrence
Publisher : Elsevier
ISBN 13 : 1845699815
Total Pages : 865 pages
Book Rating : 4.19/5 ( download)

DOWNLOAD NOW!

Download or read book Advances in Laser Materials Processing written by Jonathan R. Lawrence and published by Elsevier. This book was released on 2010-07-27 with total page 865 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because of its capacity for continuous development and flexibility of use, the laser has become a mainstream manufacturing tool in many industrial sectors. This timely book relays the state-of-the-art in laser materials processing technology and applications and likely advances to be made from current research taking place around the world. The book also promotes appreciation for laser applications in a variety of industrial sectors. After two introductory chapters, the book reviews the main areas of laser processing. Starting with laser cutting and machining, the book discusses laser welding, annealing and hardening. It then considers surface treatment, coating and materials deposition as well as other engineering techniques such as peening and net-shape engineering, before discussing laser micro and nano-fabrication techniques. The book concludes by looking at modelling and process control. With its distinguished editorial team and contributions from renowned researchers working in every corner of the globe, Advances in laser materials processing provides a comprehensive yet detailed coverage of the many topics that comprise the field of laser materials processing. It provides a reference source for the scientists and engineers in such areas as metals processing and microelectronics, as well those conducting laser materials processing research in either academia or industry. A comprehensive practitioner guide and reference work explaining state-of-the-art laser processing technologies in manufacturing and other disciplines Explores the challenges, potential and future directions through the continuous development of new, application-specific lasers in materials processing Discusses coatings and material deposition with lasers with including the production of coatings by laser-assisted processes, laser direct metal deposition and laser induced forward transfer (LIFT)

Author : C. A. Brebbia
Publisher : WIT Press
ISBN 13 : 1845640845
Total Pages : 929 pages
Book Rating : 4.42/5 ( download)

DOWNLOAD NOW!

Download or read book Computational Methods and Experimental Measurements XIII written by C. A. Brebbia and published by WIT Press. This book was released on 2007 with total page 929 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing papers presented at the Thirteenth International Conference in this well established series on (CMEM) Computational Methods and Experimental Measurements. These proceedings review state-of-the-art developments on the interaction between numerical methods and experimental measurements.Featured topics include: Computational and Experimental Methods; Experimental and Computaqional Analysis; Computer Interaction and Control of Experiments; Direct, Indirect and In-Situ Measurements; Particle Methods; Structural and Stress Analysis; Structural Dynamics; Dynamics and Vibrations; Electrical and Electromagnetic Applications; Biomedical Applications; Heat Transfer; Thermal Processes; Fluid Flow; Data Acquisition; Remediation and Processing and Industrial Applications.

Author : J. T. M. de Hosson
Publisher :
ISBN 13 : 9781845647230
Total Pages : 0 pages
Book Rating : 4.38/5 ( download)

DOWNLOAD NOW!

Download or read book Surface Effects and Contact Mechanics XI written by J. T. M. de Hosson and published by . This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: