Vibro Acoustic Sources In Lightweight Buildings

Author : Andreas Mayr
Publisher : Logos Verlag Berlin GmbH
ISBN 13 : 3832526986
Total Pages : 321 pages
Book Rating : 4.86/5 ( download)

DOWNLOAD NOW!

Download or read book Vibro-Acoustic Sources in Lightweight Buildings written by Andreas Mayr and published by Logos Verlag Berlin GmbH. This book was released on 2010 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: The work reported in this thesis addresses the problem of structure-borne sound transmission in buildings. Vibrating sources, such as services plant and domestic appliances, transmit vibro-acoustic power, causing noise complaints by occupants in rooms removed from the source room. There is not yet an accepted practical method of predicting the installed power into floors or supporting walls, and thence the resultant sound pressure in rooms. This study concentrates on the prediction of the installed power from mechanical installations in lightweight buildings composed of framed and ribbed plates. To identify the characteristics of such receiver elements, a field survey has been undertaken, which involved measurement of the point and transfer mobilities of common wall and floor structures. It is shown that the range of measured values of receiver point mobility is surprisingly small and that the constructions investigated often displayed thin plate-like characteristics, with relatively small spatial variations in point mobility. These field measurements give support to the notion of averaging over contacts. This single equivalent receiver mobility has been assembled both from measured data and from the approximate method and then used in combination with single equivalent source data, to yield an approximate prediction of the installed power. The agreement obtained between the exact and approximate values allowed consideration of a practical implementation of the approximate prediction method, based on a reception plate method which yields the activity and mobility of the tested machine as single equivalent values.

Author : Matthias Lievens
Publisher : Logos Verlag Berlin GmbH
ISBN 13 : 3832534644
Total Pages : 114 pages
Book Rating : 4.46/5 ( download)

DOWNLOAD NOW!

Download or read book Structure-borne Sound Sources in Buildings written by Matthias Lievens and published by Logos Verlag Berlin GmbH. This book was released on 2013 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structure-borne sound sources are vibrational sources connected in some way to the building structure. The mechanical excitation of the building structure leads to sound radiation. This is an important source of annoyance in modern light-weight buildings. The prediction of the sound pressure level from structure-borne sound sources is highly complicated because of the complexity involved in the coupling between source and receiver structure. The current standard on characterisation of service equipment in buildings EN 12354-5, can deal with sources on heavy structures (high-mobility source) but to date, there is no engineering method available for the case of coupling between source and receiver. A case study of a washing machine on a wooden joist floor is investigated in this thesis. In the first part, measurements in the coupled state are conducted. It is shown that the normal components are sufficient to predict the sound pressure level. However, this only applies to the coupled state. In the second part, a true prediction is calculated from independently measured source and receiver quantities. The difference between predicted and directly measured sound pressure level leads to considerable errors of up to 20 dB at low frequencies. This shows that the normal components are not sufficient to predict the coupling between a washing machine and a wooden floor.

Author : Osama A B Hassan
Publisher : World Scientific Publishing Company
ISBN 13 : 9813107413
Total Pages : 972 pages
Book Rating : 4.10/5 ( download)

DOWNLOAD NOW!

Download or read book Building Acoustics and Vibration written by Osama A B Hassan and published by World Scientific Publishing Company. This book was released on 2009-06-24 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt: As a comprehensive reference dedicated to sound and vibration in buildings, Building Acoustics and Vibration addresses the basic and advanced principles that can be used to solve practical and theoretical problems typically encountered in building and architectural acoustic practices. In addition, physical and mathematical concepts are introduced and developed sufficiently to make this publication a self-contained and up-to-date source of information for readers. Building Acoustics and Vibration is a must-have textbook for engineering students, engineers, and consultants involved in the sound, vibrations and building environment. With comprehensibility and versatility in the presentation of knowledge, this highly anticipated publication will easily fill the gap in the literature of building engineering and sciences, which presently lacks an authoritative guide on the theoretical and practical aspects of building acoustics and vibration.

Author : Tianjian Lu
Publisher : Springer
ISBN 13 : 3642553583
Total Pages : 350 pages
Book Rating : 4.85/5 ( download)

DOWNLOAD NOW!

Download or read book Vibro-Acoustics of Lightweight Sandwich Structures written by Tianjian Lu and published by Springer. This book was released on 2014-07-08 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vibro-Acoustics of Lightweight Sandwich Structures introduces the study of the coupled vibration and acoustic behavior of lightweight sandwich structures in response to harmonic force and sound pressure. This book focuses on the theoretical modeling and experimental investigation of lightweight sandwich structures in order to provide a predictive framework for vibro-acoustic characteristics of typical engineering structures. Furthermore, by developing solution tools, it concentrates on the influence of key systematic parameters leading to effective guidance for optimal structure design toward lightweight, high-stiffness and superior sound insulation capability. This book is intended for researchers, scientists, engineers and graduate students in mechanical engineering especially in structural mechanics, mechanics and acoustics. Fengxian Xin and Tianjian Lu both work at the School of Aerospace, Xi’an Jiaotong University.

Author : Alphose Zingoni
Publisher : CRC Press
ISBN 13 : 1000824365
Total Pages : 4438 pages
Book Rating : 4.60/5 ( download)

DOWNLOAD NOW!

Download or read book Current Perspectives and New Directions in Mechanics, Modelling and Design of Structural Systems written by Alphose Zingoni and published by CRC Press. This book was released on 2022-09-02 with total page 4438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Current Perspectives and New Directions in Mechanics, Modelling and Design of Structural Systems comprises 330 papers that were presented at the Eighth International Conference on Structural Engineering, Mechanics and Computation (SEMC 2022, Cape Town, South Africa, 5-7 September 2022). The topics featured may be clustered into six broad categories that span the themes of mechanics, modelling and engineering design: (i) mechanics of materials (elasticity, plasticity, porous media, fracture, fatigue, damage, delamination, viscosity, creep, shrinkage, etc); (ii) mechanics of structures (dynamics, vibration, seismic response, soil-structure interaction, fluid-structure interaction, response to blast and impact, response to fire, structural stability, buckling, collapse behaviour); (iii) numerical modelling and experimental testing (numerical methods, simulation techniques, multi-scale modelling, computational modelling, laboratory testing, field testing, experimental measurements); (iv) design in traditional engineering materials (steel, concrete, steel-concrete composite, aluminium, masonry, timber); (v) innovative concepts, sustainable engineering and special structures (nanostructures, adaptive structures, smart structures, composite structures, glass structures, bio-inspired structures, shells, membranes, space structures, lightweight structures, etc); (vi) the engineering process and life-cycle considerations (conceptualisation, planning, analysis, design, optimization, construction, assembly, manufacture, maintenance, monitoring, assessment, repair, strengthening, retrofitting, decommissioning). Two versions of the papers are available: full papers of length 6 pages are included in the e-book, while short papers of length 2 pages, intended to be concise but self-contained summaries of the full papers, are in the printed book. This work will be of interest to civil, structural, mechanical, marine and aerospace engineers, as well as planners and architects.

Author : Anders Nilsson
Publisher : Springer
ISBN 13 : 3662479346
Total Pages : 452 pages
Book Rating : 4.46/5 ( download)

DOWNLOAD NOW!

Download or read book Vibro-Acoustics, Volume 2 written by Anders Nilsson and published by Springer. This book was released on 2015-09-15 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Author : Fengxian Xin
Publisher :
ISBN 13 : 9787030413222
Total Pages : 300 pages
Book Rating : 4.29/5 ( download)

DOWNLOAD NOW!

Download or read book Vibro-Acoustics of Lightweight Sandwich Structures written by Fengxian Xin and published by . This book was released on 2014 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Author : Colin Hansen
Publisher : CRC Press
ISBN 13 : 1482234009
Total Pages : 1564 pages
Book Rating : 4.08/5 ( download)

DOWNLOAD NOW!

Download or read book Active Control of Noise and Vibration written by Colin Hansen and published by CRC Press. This book was released on 2012-11-02 with total page 1564 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrating active control of both sound and vibration, this comprehensive two-volume set combines coverage of fundamental principles with the most recent theoretical and practical developments. The authors explain how to design and implement successful active control systems in practice and detail the pitfalls one must avoid to ensure a reliable and stable system. Extensively revised, updated, and expanded throughout, the second edition reflects the advances that have been made in algorithms, DSP hardware, and applications since the publication of the first edition.

Author :
Publisher : ScholarlyEditions
ISBN 13 : 1490105743
Total Pages : 993 pages
Book Rating : 4.41/5 ( download)

DOWNLOAD NOW!

Download or read book Issues in Acoustic and Ultrasound Technology: 2013 Edition written by and published by ScholarlyEditions. This book was released on 2013-05-01 with total page 993 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues in Acoustic and Ultrasound Technology: 2013 Edition is a ScholarlyEditions™ book that delivers timely, authoritative, and comprehensive information about Applied Acoustics. The editors have built Issues in Acoustic and Ultrasound Technology: 2013 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Applied Acoustics in this book to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Issues in Acoustic and Ultrasound Technology: 2013 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.

Author : Alphose Zingoni
Publisher : CRC Press
ISBN 13 : 0429761171
Total Pages : 882 pages
Book Rating : 4.71/5 ( download)

DOWNLOAD NOW!

Download or read book Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications written by Alphose Zingoni and published by CRC Press. This book was released on 2019-08-21 with total page 882 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications comprises 411 papers that were presented at SEMC 2019, the Seventh International Conference on Structural Engineering, Mechanics and Computation, held in Cape Town, South Africa, from 2 to 4 September 2019. The subject matter reflects the broad scope of SEMC conferences, and covers a wide variety of engineering materials (both traditional and innovative) and many types of structures. The many topics featured in these Proceedings can be classified into six broad categories that deal with: (i) the mechanics of materials and fluids (elasticity, plasticity, flow through porous media, fluid dynamics, fracture, fatigue, damage, delamination, corrosion, bond, creep, shrinkage, etc); (ii) the mechanics of structures and systems (structural dynamics, vibration, seismic response, soil-structure interaction, fluid-structure interaction, response to blast and impact, response to fire, structural stability, buckling, collapse behaviour); (iii) the numerical modelling and experimental testing of materials and structures (numerical methods, simulation techniques, multi-scale modelling, computational modelling, laboratory testing, field testing, experimental measurements); (iv) innovations and special structures (nanostructures, adaptive structures, smart structures, composite structures, bio-inspired structures, shell structures, membranes, space structures, lightweight structures, long-span structures, tall buildings, wind turbines, etc); (v) design in traditional engineering materials (steel, concrete, steel-concrete composite, aluminium, masonry, timber, glass); (vi) the process of structural engineering (conceptualisation, planning, analysis, design, optimization, construction, assembly, manufacture, testing, maintenance, monitoring, assessment, repair, strengthening, retrofitting, decommissioning). The SEMC 2019 Proceedings will be of interest to civil, structural, mechanical, marine and aerospace engineers. Researchers, developers, practitioners and academics in these disciplines will find them useful. Two versions of the papers are available. Short versions, intended to be concise but self-contained summaries of the full papers, are in this printed book. The full versions of the papers are in the e-book.