Programming And Application Of A Dsp To Control And Regulate Power Electronic Converters Programming In C

Author : Baris Bagci
Publisher : diplom.de
ISBN 13 : 3954897369
Total Pages : 145 pages
Book Rating : 4.60/5 ( download)

DOWNLOAD NOW!

Download or read book Programming and Application of a DSP to Control and Regulate Power Electronic Converters: Programming in C++ written by Baris Bagci and published by diplom.de. This book was released on 2014-03-01 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this project has been to study, operate and program the 32-bit 150MIPS TMS320F2812 DSP developed by Texas Instruments Inc. In addition, it has also been a goal to implement fast estimation techniques for control of resonant converters. For this purpose, PWM signals that are generated using this DSP are used. The demands on the system and the hardware to solve the problem were already decided when I started the work. The algorithms were programmed in C/C++ language, compiled, debugged and transferred to the DSP development board in a compiling and simulation tool (downloader), called CCS (Code Composer Studio v2), also provided by Texas Instruments. In the first chapters of this study I give general information about control systems, digital signal processors, digital signal processing and the DSP used in this work. The following chapters tell about PWM, how to configure the PWM outputs and some examples related with PWM signals are given. After a short review of series resonant converters, I presented the last example implemented in this project. I conclude with a summary and provide some hints of future work.

Author : Baris Bagci
Publisher : Grin Publishing
ISBN 13 : 9783638701846
Total Pages : 145 pages
Book Rating : 4.40/5 ( download)

DOWNLOAD NOW!

Download or read book Programming and Use of TMS320F2812 DSP to Control and Regulate Power Electronic Converters written by Baris Bagci and published by Grin Publishing. This book was released on 2007-08 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: Master's Thesis from the year 2003 in the subject Electrotechnology, grade: 1 (A), Cologne University of Applied Sciences (Institute for Automation Technology), language: English, abstract: The purpose of this master thesis project has been to study, operate and program the 32-bit 150MIPS TMS320F2812 DSP developed by Texas Instruments Inc. In addition, it has also been a goal to implement fast estimation techniques for control of resonant converters. For this purpose, PWM signals that are generated using this DSP are used. The demands on the system and the hardware to solve the problem were already decided when I started the work. The algorithms were programmed in C/C++ language, compiled, debugged and transferred to the DSP development board in a compiling and simulation tool (downloader), called CCS (Code Composer Studio v2), also provided by Texas Instruments. In the first chapters of this thesis I give general information about control systems, digital signal processors, digital signal processing and the DSP used in this work. The following chapters tell about PWM, how to configure the PWM outputs and some examples related with PWM signals are given. After a short review of series resonant converters, I presented the last example implemented in this project. I conclude with a summary and provide some hints of future work.

Author : Krzysztof Sozański
Publisher : Springer Science & Business Media
ISBN 13 : 1447152670
Total Pages : 280 pages
Book Rating : 4.75/5 ( download)

DOWNLOAD NOW!

Download or read book Digital Signal Processing in Power Electronics Control Circuits written by Krzysztof Sozański and published by Springer Science & Business Media. This book was released on 2013-07-03 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many digital control circuits in current literature are described using analog transmittance. This may not always be acceptable, especially if the sampling frequency and power transistor switching frequencies are close to the band of interest. Therefore, a digital circuit is considered as a digital controller rather than an analog circuit. This helps to avoid errors and instability in high frequency components. Digital Signal Processing in Power Electronics Control Circuits covers problems concerning the design and realization of digital control algorithms for power electronics circuits using digital signal processing (DSP) methods. This book bridges the gap between power electronics and DSP. The following realizations of digital control circuits are considered: digital signal processors, microprocessors, microcontrollers, programmable digital circuits. Discussed in this book is signal processing, starting from analog signal acquisition, through its conversion to digital form, methods of its filtration and separation, and ending with pulse control of output power transistors. The book is focused on two applications for the considered methods of digital signal processing: an active power filter and a digital class D power amplifier. The major benefit to readers is the acquisition of specific knowledge concerning discussions on the processing of signals from voltage or current sensors using a digital signal processor and to the signals controlling the output inverter transistors. Included are some Matlab examples for illustration of the considered problems.

Author : Ali Emadi
Publisher : CRC Press
ISBN 13 : 1351834363
Total Pages : 365 pages
Book Rating : 4.60/5 ( download)

DOWNLOAD NOW!

Download or read book Integrated Power Electronic Converters and Digital Control written by Ali Emadi and published by CRC Press. This book was released on 2017-12-19 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because of the demand for higher efficiencies, smaller output ripple, and smaller converter size for modern power electronic systems, integrated power electronic converters could soon replace conventional switched-mode power supplies. Synthesized integrated converters and related digital control techniques address problems related to cost, space, flexibility, energy efficiency, and voltage regulation—the key factors in digital power management and implementation. Meeting the needs of professionals working in power electronics, as well as advanced engineering students, Integrated Power Electronic Converters and Digital Control explores the many benefits associated with integrated converters. This informative text details boost type, buck type, and buck-boost type integrated topologies, as well as other integrated structures. It discusses concepts behind their operation as well specific applications. Topics discussed include: Isolated DC-DC converters such as flyback, forward, push-pull, full-bridge, and half-bridge Power factor correction and its application Definition of the integrated switched-mode power supplies Steady-state analysis of the boost integrated flyback rectifier energy storage converter Dynamic analysis of the buck integrated forward converter Digital control based on the use of digital signal processors (DSPs) With innovations in digital control becoming ever more pervasive, system designers continue to introduce products that integrate digital power management and control integrated circuit solutions, both hybrid and pure digital. This detailed assessment of the latest advances in the field will help anyone working in power electronics and related industries stay ahead of the curve.

Author : Farhad Shahnia
Publisher : Springer
ISBN 13 : 9812872817
Total Pages : 741 pages
Book Rating : 4.14/5 ( download)

DOWNLOAD NOW!

Download or read book Static Compensators (STATCOMs) in Power Systems written by Farhad Shahnia and published by Springer. This book was released on 2014-12-01 with total page 741 pages. Available in PDF, EPUB and Kindle. Book excerpt: A static compensator (STATCOM), also known as static synchronous compensator, is a member of the flexible alternating current transmission system (FACTS) devices. It is a power-electronics based regulating device which is composed of a voltage source converter (VSC) and is shunt-connected to alternating current electricity transmission and distribution networks. The voltage source is created from a DC capacitor and the STATCOM can exchange reactive power with the network. It can also supply some active power to the network, if a DC source of power is connected across the capacitor. A STATCOM is usually installed in the electric networks with poor power factor or poor voltage regulation to improve these problems. In addition, it is used to improve the voltage stability of a network. This book covers STATCOMs from different aspects. Different converter topologies, output filters and modulation techniques utilized within STATCOMs are reviewed. Mathematical modeling of STATCOM is presented in detail and different STATCOM control strategies and algorithms are discussed. Modified load flow calculations for a power system in the presence of STATCOMs are presented. Several applications of STATCOMs in transmission and distribution networks are discussed in different examples and optimization techniques for defining the optimal location and ratings of the STATCOMs in power systems are reviewed. Finally, the performance of the network protection scheme in the presence of STATCOMs is described. This book will be an excellent resource for postgraduate students and researchers interested in grasping the knowledge on STATCOMs.

Author : Muhammad H. Rashid
Publisher : Butterworth-Heinemann
ISBN 13 : 0128114088
Total Pages : 1522 pages
Book Rating : 4.87/5 ( download)

DOWNLOAD NOW!

Download or read book Power Electronics Handbook written by Muhammad H. Rashid and published by Butterworth-Heinemann. This book was released on 2017-09-09 with total page 1522 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power Electronics Handbook, Fourth Edition, brings together over 100 years of combined experience in the specialist areas of power engineering to offer a fully revised and updated expert guide to total power solutions. Designed to provide the best technical and most commercially viable solutions available, this handbook undertakes any or all aspects of a project requiring specialist design, installation, commissioning and maintenance services. Comprising a complete revision throughout and enhanced chapters on semiconductor diodes and transistors and thyristors, this volume includes renewable resource content useful for the new generation of engineering professionals. This market leading reference has new chapters covering electric traction theory and motors and wide band gap (WBG) materials and devices. With this book in hand, engineers will be able to execute design, analysis and evaluation of assigned projects using sound engineering principles and adhering to the business policies and product/program requirements. Includes a list of leading international academic and professional contributors Offers practical concepts and developments for laboratory test plans Includes new technical chapters on electric vehicle charging and traction theory and motors Includes renewable resource content useful for the new generation of engineering professionals

Author : Panos Kotsampopoulos
Publisher : MDPI
ISBN 13 : 3036512144
Total Pages : 306 pages
Book Rating : 4.43/5 ( download)

DOWNLOAD NOW!

Download or read book Advancements in Real-Time Simulation of Power and Energy Systems written by Panos Kotsampopoulos and published by MDPI. This book was released on 2021-05-20 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern power and energy systems are characterized by the wide integration of distributed generation, storage and electric vehicles, adoption of ICT solutions, and interconnection of different energy carriers and consumer engagement, posing new challenges and creating new opportunities. Advanced testing and validation methods are needed to efficiently validate power equipment and controls in the contemporary complex environment and support the transition to a cleaner and sustainable energy system. Real-time hardware-in-the-loop (HIL) simulation has proven to be an effective method for validating and de-risking power system equipment in highly realistic, flexible, and repeatable conditions. Controller hardware-in-the-loop (CHIL) and power hardware-in-the-loop (PHIL) are the two main HIL simulation methods used in industry and academia that contribute to system-level testing enhancement by exploiting the flexibility of digital simulations in testing actual controllers and power equipment. This book addresses recent advances in real-time HIL simulation in several domains (also in new and promising areas), including technique improvements to promote its wider use. It is composed of 14 papers dealing with advances in HIL testing of power electronic converters, power system protection, modeling for real-time digital simulation, co-simulation, geographically distributed HIL, and multiphysics HIL, among other topics.

Author : M. Godoy Simoes
Publisher : John Wiley & Sons
ISBN 13 : 1119058279
Total Pages : 352 pages
Book Rating : 4.74/5 ( download)

DOWNLOAD NOW!

Download or read book Modeling Power Electronics and Interfacing Energy Conversion Systems written by M. Godoy Simoes and published by John Wiley & Sons. This book was released on 2016-09-16 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discusses the application of mathematical and engineering tools for modeling, simulation and control oriented for energy systems, power electronics and renewable energy This book builds on the background knowledge of electrical circuits, control of dc/dc converters and inverters, energy conversion and power electronics. The book shows readers how to apply computational methods for multi-domain simulation of energy systems and power electronics engineering problems. Each chapter has a brief introduction on the theoretical background, a description of the problems to be solved, and objectives to be achieved. Block diagrams, electrical circuits, mathematical analysis or computer code are covered. Each chapter concludes with discussions on what should be learned, suggestions for further studies and even some experimental work. Discusses the mathematical formulation of system equations for energy systems and power electronics aiming state-space and circuit oriented simulations Studies the interactions between MATLAB and Simulink models and functions with real-world implementation using microprocessors and microcontrollers Presents numerical integration techniques, transfer-function modeling, harmonic analysis and power quality performance assessment Examines existing software such as, MATLAB/Simulink, Power Systems Toolbox and PSIM to simulate power electronic circuits including the use of renewable energy sources such as wind and solar sources The simulation files are available for readers who register with the Google Group: power-electronics-interfacing-energy-conversion-systems@googlegroups.com. After your registration you will receive information in how to access the simulation files, the Google Group can also be used to communicate with other registered readers of this book.

Author : Marcian Cirstea
Publisher : Elsevier
ISBN 13 : 0080497365
Total Pages : 413 pages
Book Rating : 4.65/5 ( download)

DOWNLOAD NOW!

Download or read book Neural and Fuzzy Logic Control of Drives and Power Systems written by Marcian Cirstea and published by Elsevier. This book was released on 2002-07-01 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors guide readers quickly and concisely through the complex topics of neural networks, fuzzy logic, mathematical modelling of electrical machines, power systems control and VHDL design. Unlike the academic monographs that have previously been published on each of these subjects, this book combines them and is based round case studies of systems analysis, control strategies, design, simulation and implementation. The result is a guide to applied control systems design that will appeal equally to students and professional design engineers. The book can also be used as a unique VHDL design aid, based on real-world power engineering applications. Introduces cutting-edge control systems to a wide readership of engineers and students The first book on neuro-fuzzy control systems to take a practical, applications-based approach, backed up with worked examples and case studies Learn to use VHDL in real-world applications

Author : Krzysztof Sozański
Publisher : Springer
ISBN 13 : 1447173325
Total Pages : 340 pages
Book Rating : 4.28/5 ( download)

DOWNLOAD NOW!

Download or read book Digital Signal Processing in Power Electronics Control Circuits written by Krzysztof Sozański and published by Springer. This book was released on 2017-05-10 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: This revised and extended second edition covers problems concerning the design and realization of digital control algorithms for power electronics circuits using digital signal processing (DSP) methods. This book discusses signal processing, starting from analog signal acquisition, through conversion to digital form, methods of filtration and separation, and ending with pulse control of output power transistors. The book is focused on two applications for the considered methods of digital signal processing, a three-phase shunt active power filter and a digital class-D audio power amplifier. The book bridges the gap between power electronics and digital signal processing. Many control algorithms and circuits for power electronics in the current literature are described using analog transmittances. This may not always be acceptable, especially if half of the sampling frequencies and half of the power transistor switching frequencies are close to the band of interest. Therefore in this book, a digital circuit is treated as a digital circuit with its own peculiar characteristics, rather than an analog circuit. This helps to avoid errors and instability. This edition includes a new chapter dealing with selected problems of simulation of power electronics systems together with digital control circuits. The book includes numerous examples using MATLAB and PSIM programs.