Pedot

Author : Andreas Elschner
Publisher : CRC Press
ISBN 13 : 1420069128
Total Pages : 380 pages
Book Rating : 4.29/5 ( download)

DOWNLOAD NOW!

Download or read book PEDOT written by Andreas Elschner and published by CRC Press. This book was released on 2010-11-02 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: While there is information available in handbooks on polythiophene chemistry and physics, until now, few if any books have focused exclusively on the most forwardly developed electrically conductive polymer, Poly (3,4-ethylenedioxythiophene)-otherwise known as PEDOT. This resource provides full chemical, physical, and technical information about this important conducting polymer, discussing basic knowledge and exploring its technical applications. Presented information is based on information generated at universities and through academic research, as well as by industrial scientists, providing a complete picture of the experimental and the practical aspects of this important polymer.

Author : Fengxing Jiang
Publisher : Woodhead Publishing
ISBN 13 : 0128232277
Total Pages : 298 pages
Book Rating : 4.79/5 ( download)

DOWNLOAD NOW!

Download or read book Advanced PEDOT Thermoelectric Materials written by Fengxing Jiang and published by Woodhead Publishing. This book was released on 2021-10-27 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: PEDOT is currently the most widely used polymeric material in research and development. Over the past 10 years, PEDOT has been investigated for potential organic thermoelectric applications because of its superior thermoelectric and mechanical properties compared with other conductive polymers. However, many challenges remain to be solved before it is translated into key technologies. Advanced PEDOT Thermoelectric Materials summarizes current progress and the challenges of PEDOT thermoelectric materials, while clarifying directions for future development. This book provides a comprehensive overview of chemical, physical, and technical information about this organic thermoelectric polymer. The authors also give details about the theoretical basis of PEDOT, including preparation and characterization, and its development as a high-performance thermoelectric material. Provides an overview of techniques to optimize the thermoelectric performance of PEDOT materials. Introduces the fundamentals of PEDOT, including material synthesis, characterization, preparation, thermal transport, and more. Discusses emerging applications in thermoelectric devices and future directions.

Author : Luís Alcácer
Publisher : Morgan & Claypool Publishers
ISBN 13 : 1643271687
Total Pages : 135 pages
Book Rating : 4.82/5 ( download)

DOWNLOAD NOW!

Download or read book Electronic Structure of Organic Semiconductors written by Luís Alcácer and published by Morgan & Claypool Publishers. This book was released on 2018-12-07 with total page 135 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written in the perspective of an experimental chemist, this book puts together some fundamentals from chemistry, solid state physics and quantum chemistry, to help with understanding and predicting the electronic and optical properties of organic semiconductors, both polymers and small molecules. The text is intended to assist graduate students and researchers in the field of organic electronics to use theory to design more efficient materials for organic electronic devices such as organic solar cells, light emitting diodes and field effect transistors. After addressing some basic topics in solid state physics, a comprehensive introduction to molecular orbitals and band theory leads to a description of computational methods based on Hartree-Fock and density functional theory (DFT), for predicting geometry conformations, frontier levels and energy band structures. Topological defects and transport and optical properties are then addressed, and one of the most commonly used transparent conducting polymers, PEDOT:PSS, is described in some detail as a case study.

Author : W.Y. Fan
Publisher : Trans Tech Publications Ltd
ISBN 13 : 3038261394
Total Pages : 1540 pages
Book Rating : 4.91/5 ( download)

DOWNLOAD NOW!

Download or read book Energy Research and Power Engineering written by W.Y. Fan and published by Trans Tech Publications Ltd. This book was released on 2013-07-31 with total page 1540 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collection of selected, peer reviewed papers from the 2013 International Conference on Energy Research and Power Engineering (ERPE 2013), May 24-25, 2013, Zhengzhou, Henan, China. The 303 papers are grouped as follows: Chapter 1: Advanced Technologies and Researches in Materials Science; Chapter 2: Advances in Mechanical Engineering; Chapter 3: Mechatronics, Control, Measurement and Monitoring. Technologies and Solutions; Chapter 4: Energy Industry. Engineering Researches and Management; Chapter 5: Materials and Technologies in Construction.

Author : Joong Hee Lee
Publisher : Trans Tech Publications Ltd
ISBN 13 : 3038134015
Total Pages : 1332 pages
Book Rating : 4.15/5 ( download)

DOWNLOAD NOW!

Download or read book Multi-Functional Materials and Structures III written by Joong Hee Lee and published by Trans Tech Publications Ltd. This book was released on 2010-08-11 with total page 1332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). It has become a essential but formidable task for all industries to concentrate on developing Nature-friendly products and services. The present work aims to bring together the current knowledge concerning Nature-friendly multi-functional materials and structures. The contributions concentrate on natural fiber composites, smart materials and structures, and advanced composites and their applications, and so on. Readers will find within the most up-to-date advances in the field of multi-functional materials and structures.

Author : Jian Zhong Shao
Publisher : Trans Tech Publications Ltd
ISBN 13 : 3038137863
Total Pages : 800 pages
Book Rating : 4.63/5 ( download)

DOWNLOAD NOW!

Download or read book Eco-Dyeing, Finishing and Green Chemistry written by Jian Zhong Shao and published by Trans Tech Publications Ltd. This book was released on 2012-01-03 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). EDFGC is an international conference series covering research and development in the fields of textile dyeing/finishing and green chemistry. With its theme of “Innovation, Eco-Textile and Sustainability”, the 2011 conference provided a platform for the presentation of research findings, the exchange of innovative ideas and the seeking-out of opportunities for collaboration, in the above fields, among both academics and industrialists all over the world. The proceedings of EDFGC 2011 include Eco-Dyeing & Finishing, Functional Textiles, Green Chemistry and Functional Chemicals, Pollution Control and Energy Conservation, Fundamental Research and Test & Characterization.

Author : Jimmy Chih Ming Kao
Publisher : Trans Tech Publications Ltd
ISBN 13 : 3038266612
Total Pages : 1960 pages
Book Rating : 4.17/5 ( download)

DOWNLOAD NOW!

Download or read book Frontiers of Energy, Materials and Information Engineering written by Jimmy Chih Ming Kao and published by Trans Tech Publications Ltd. This book was released on 2014-10-01 with total page 1960 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collection of Selected, Peer Reviewed Papers from the 2014 International Conference on Frontiers of Energy, Materials and Information Engineering (ICFMEI 2014), August 21-22, 2014, Hong Kong. The 411 papers are grouped as follows: Chapter 1: Materials and Chemical Engineering and Technologies, Chapter 2: Power, Energy and Thermal Engineering, Environmental and Safety Engineering, Chapter 3: Civil and Building Engineering, Structural and Geotechnical Engineering, Applied Mechanics, Chapter 4: Mechatronics, Measurement and Detection, Control and Automation, Mechanics Applications, Chapter 5: Computer, Communication, Information, Algorithms and Numerical Methods of Data Processing Engineering, Chapter 6: Urban and City Development, Traffic and Transportation Engineering, Chapter 7: New Technologies in Education and Sports, Chapter 8: Engineering Management, Production Management, Business and Economics.

Author : Lian Cheng Zhao
Publisher : Trans Tech Publications Ltd
ISBN 13 : 3038138614
Total Pages : 3680 pages
Book Rating : 4.17/5 ( download)

DOWNLOAD NOW!

Download or read book Materials Processing Technology II written by Lian Cheng Zhao and published by Trans Tech Publications Ltd. This book was released on 2012-06-14 with total page 3680 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work comprises papers selected from the 2nd International Conference on Advanced Engineering Materials and Technology (AEMT 2012) which was held on the 15th to 17th June 2012 in Zhuhai, China. The peer-reviewed papers are grouped into sixteen chapters: Thin Films; Surface Engineering/Coatings; Modeling, Analysis and Simulation; Materials Forming; Materials Machining; Welding and Joining; Mechanical Behavior and Fracture; Computer Aided Material Design; Laser Processing Technology; Theory and Application of Friction and Wear; Dynamic Mechanical Analysis, Optimization and Control; Thermal Engineering Theory and Applications; Precision Manufacturing Technology and Measurements; Material Physics and Chemistry; Dynamic Analysis of Processing; Advanced Design Technology.

Author : Pietro Vincenzini
Publisher : Trans Tech Publications Ltd
ISBN 13 : 3908158893
Total Pages : 120 pages
Book Rating : 4.99/5 ( download)

DOWNLOAD NOW!

Download or read book Next Generation Micro/Nano Systems written by Pietro Vincenzini and published by Trans Tech Publications Ltd. This book was released on 2012-09-11 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 15 peer-reviewed papers collected here together offer a plenitude of up-to-date information on “Next Generation Micro/Nano Systems”. Volume is indexed by Thomson Reuters CPCI-S (WoS). The papers are conveniently arranged into: Chapter 1: Physical, Chemical and Optical MEMS, Chapter 2: Radiofrequency MEMS, Chapter 3: Micro/Nano Fluidics.

Author : Johannes Michael Küffner
Publisher : GRIN Verlag
ISBN 13 : 3656875510
Total Pages : 106 pages
Book Rating : 4.12/5 ( download)

DOWNLOAD NOW!

Download or read book Large-scale full-solution, vacuum-free gravure printed ITO-free flexible organic solar cells written by Johannes Michael Küffner and published by GRIN Verlag. This book was released on 2015-01-14 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bachelor Thesis from the year 2014 in the subject Technology, grade: 1,0, Friedrich-Alexander University Erlangen-Nuremberg, course: Nanotechnologie, language: English, abstract: This bachelor thesis presents the fabrication and evaluation of large-scale full-solution roll-to-roll processed, ITO-free flexible organic solar cells in a modified inverted device geometry by gravure printing on a discrete laboratory-scale printing system. The layer stack is based on flexible PET substrate whereupon the back silver cathode was printed on top. The electron transport layer of ZnO and a double light absorbing photoactive layer of P3HT:PCBM, the hole transport layer of PEDOT:PSS and front silver anode were printed consecutively. All layers were roll-to-roll gravure printed from solution under full ambient vacuum-free conditions at a web speed of 2 m min−1. The completed solar cells were characterized by J-V and comprising layers by light beam induced current measurements. For fast testing and reproducibility experiments the remaining layers of the stack after each gravure printed film were deposited by slot-die coating and flexographic printing on a single roll coating system. Unfortunately functional organic solar cells of a fully gravure printed layer stack could not be found. A power conversion efficiency of 0.15 % of partly roll-to-roll gravure printed and residuary roll-based slot-die coated and flexographic printed organic solar cells under AM1.5G illumination was obtained. The thesis contains a brief introduction in the topic of renewable energies and organic photovoltaic followed by the state of art in two-dimensional gravure printing organic solar cells and the motivation to particularly foreground this fabrication method. In the fundamentals part the working principle, device geometries, affiliated by the concept of ITO-free organic solar cells and materials in an organic photovoltaic device including characterization methods are presented. Afterwards large-scale manufacturing techniques of organic photovoltaic comprising coating and printing technologies are reviewed and the roll-to-roll manufacturing strategies are introduced. In the experimental part the design, machinery and equipment used and fabrication of gravure printed flexible organic solar cell are chronologically described in detail in connection with presenting and discussing the results after characterizing the completed solar cells. Challenges that were faced during the studies are described subsequently and solutions of appeared problems are presented. A conclusion and outlook finalizes the thesis.