Model Tests And Numerical Simulations Of Liquefaction And Lateral Spreading

Author : Bruce L. Kutter
Publisher : Springer Nature
ISBN 13 : 3030228185
Total Pages : 660 pages
Book Rating : 4.87/5 ( download)

DOWNLOAD NOW!

Download or read book Model Tests and Numerical Simulations of Liquefaction and Lateral Spreading written by Bruce L. Kutter and published by Springer Nature. This book was released on 2019-01-01 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book presents work collected through the Liquefaction Experiments and Analysis Projects (LEAP) in 2017. It addresses the repeatability, variability, and sensitivity of lateral spreading observed in twenty-four centrifuge model tests on mildly sloping liquefiable sand. The centrifuge tests were conducted at nine different centrifuge facilities around the world. For the first time, a sufficient number of experiments were conducted to enable assessment of variability of centrifuge test results. The experimental data provided a unique basis for assessing the capabilities of twelve different simulation platforms for numerical simulation of soil liquefaction. The results of the experiments and the numerical simulations are presented and discussed in papers submitted by the project participants. The work presented in this book was followed by LEAP-Asia that included assessment of a generalized scaling law and culminated in a workshop in Osaka, Japan in March 2019. LEAP-2020, ongoing at the time of printing, is addressing the validation of soil-structure interaction analyses of retaining walls involving a liquefiable soil. A workshop is planned at RPI, USA in 2020. .

Author : Mourad Zeghal
Publisher :
ISBN 13 : 9781013275005
Total Pages : 654 pages
Book Rating : 4.04/5 ( download)

DOWNLOAD NOW!

Download or read book Model Tests and Numerical Simulations of Liquefaction and Lateral Spreading written by Mourad Zeghal and published by . This book was released on 2020-10-09 with total page 654 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book presents work collected through the Liquefaction Experiments and Analysis Projects (LEAP) in 2017. It addresses the repeatability, variability, and sensitivity of lateral spreading observed in twenty-four centrifuge model tests on mildly sloping liquefiable sand. The centrifuge tests were conducted at nine different centrifuge facilities around the world. For the first time, a sufficient number of experiments were conducted to enable assessment of variability of centrifuge test results. The experimental data provided a unique basis for assessing the capabilities of twelve different simulation platforms for numerical simulation of soil liquefaction. The results of the experiments and the numerical simulations are presented and discussed in papers submitted by the project participants. The work presented in this book was followed by LEAP-Asia that included assessment of a generalized scaling law and culminated in a workshop in Osaka, Japan in March 2019. LEAP-2020, ongoing at the time of printing, is addressing the validation of soil-structure interaction analyses of retaining walls involving a liquefiable soil. A workshop is planned at RPI, USA in 2020. This work was published by Saint Philip Street Press pursuant to a Creative Commons license permitting commercial use. All rights not granted by the work's license are retained by the author or authors.

Author : Tetsuo Tobita
Publisher : Springer Nature
ISBN 13 : 3031488210
Total Pages : 448 pages
Book Rating : 4.14/5 ( download)

DOWNLOAD NOW!

Download or read book Model Tests and Numerical Simulations of Liquefaction and Lateral Spreading II written by Tetsuo Tobita and published by Springer Nature. This book was released on with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Author : Francesco Silvestri
Publisher : CRC Press
ISBN 13 : 0429632010
Total Pages : 8083 pages
Book Rating : 4.13/5 ( download)

DOWNLOAD NOW!

Download or read book Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions written by Francesco Silvestri and published by CRC Press. This book was released on 2019-07-19 with total page 8083 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions contains invited, keynote and theme lectures and regular papers presented at the 7th International Conference on Earthquake Geotechnical Engineering (Rome, Italy, 17-20 June 2019. The contributions deal with recent developments and advancements as well as case histories, field monitoring, experimental characterization, physical and analytical modelling, and applications related to the variety of environmental phenomena induced by earthquakes in soils and their effects on engineered systems interacting with them. The book is divided in the sections below: Invited papers Keynote papers Theme lectures Special Session on Large Scale Testing Special Session on Liquefact Projects Special Session on Lessons learned from recent earthquakes Special Session on the Central Italy earthquake Regular papers Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions provides a significant up-to-date collection of recent experiences and developments, and aims at engineers, geologists and seismologists, consultants, public and private contractors, local national and international authorities, and to all those involved in research and practice related to Earthquake Geotechnical Engineering.

Author : Pijush Samui
Publisher : Academic Press
ISBN 13 : 0128218525
Total Pages : 518 pages
Book Rating : 4.25/5 ( download)

DOWNLOAD NOW!

Download or read book Modeling in Geotechnical Engineering written by Pijush Samui and published by Academic Press. This book was released on 2020-12-01 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling in Geotechnical Engineering is a one stop reference for a range of computational models, the theory explaining how they work, and case studies describing how to apply them. Drawing on the expertise of contributors from a range of disciplines including geomechanics, optimization, and computational engineering, this book provides an interdisciplinary guide to this subject which is suitable for readers from a range of backgrounds. Before tackling the computational approaches, a theoretical understanding of the physical systems is provided that helps readers to fully grasp the significance of the numerical methods. The various models are presented in detail, and advice is provided on how to select the correct model for your application. Provides detailed descriptions of different computational modelling methods for geotechnical applications, including the finite element method, the finite difference method, and the boundary element method Gives readers the latest advice on the use of big data analytics and artificial intelligence in geotechnical engineering Includes case studies to help readers apply the methods described in their own work

Author : National Academies of Sciences, Engineering, and Medicine
Publisher :
ISBN 13 : 9780309440271
Total Pages : 350 pages
Book Rating : 4.70/5 ( download)

DOWNLOAD NOW!

Download or read book State of the Art and Practice in the Assessment of Earthquake-Induced Soil Liquefaction and Its Consequences written by National Academies of Sciences, Engineering, and Medicine and published by . This book was released on 2019-01-30 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earthquake-induced soil liquefaction (liquefaction) is a leading cause of earthquake damage worldwide. Liquefaction is often described in the literature as the phenomena of seismic generation of excess porewater pressures and consequent softening of granular soils. Many regions in the United States have been witness to liquefaction and its consequences, not just those in the west that people associate with earthquake hazards. Past damage and destruction caused by liquefaction underline the importance of accurate assessments of where liquefaction is likely and of what the consequences of liquefaction may be. Such assessments are needed to protect life and safety and to mitigate economic, environmental, and societal impacts of liquefaction in a cost-effective manner. Assessment methods exist, but methods to assess the potential for liquefaction triggering are more mature than are those to predict liquefaction consequences, and the earthquake engineering community wrestles with the differences among the various assessment methods for both liquefaction triggering and consequences. State of the Art and Practice in the Assessment of Earthquake-Induced Soil Liquefaction and Its Consequences evaluates these various methods, focusing on those developed within the past 20 years, and recommends strategies to minimize uncertainties in the short term and to develop improved methods to assess liquefaction and its consequences in the long term. This report represents a first attempt within the geotechnical earthquake engineering community to consider, in such a manner, the various methods to assess liquefaction consequences.

Author : Xianhong Meng
Publisher :
ISBN 13 :
Total Pages : 474 pages
Book Rating : 4.24/5 ( download)

DOWNLOAD NOW!

Download or read book Estimation of Liquefaction-induced Lateral Spread from Numerical Modeling and Its Application written by Xianhong Meng and published by . This book was released on 2012 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Author : Rui Wang
Publisher : Springer
ISBN 13 : 3662496631
Total Pages : 131 pages
Book Rating : 4.33/5 ( download)

DOWNLOAD NOW!

Download or read book Single Piles in Liquefiable Ground written by Rui Wang and published by Springer. This book was released on 2016-03-17 with total page 131 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis focuses on the seismic response of piles in liquefiable ground. It describes the design of a three-dimensional, unified plasticity model for large post-liquefaction shear deformation of sand, formulated and implemented for parallel computing. It also presents a three-dimensional, dynamic finite element analysis method for piles in liquefiable ground, developed on the basis of this model,. Employing a combination of case analysis, centrifuge shaking table experiments and numerical simulations using the proposed methods, it demonstrates the seismic response patterns of single piles in liquefiable ground. These include basic force-resistance mode, kinematic and inertial interaction coupling mechanism and major influence factors. It also discusses a beam on the nonlinear Winkler foundation (BNWF) solution and a modified neutral plane solution developed and validated using centrifuge experiments for piles in consolidating and reconsolidating ground. Lastly, it studies axial pile force and settlement during post-earthquake reconsolidation, showing pile axial force to be irrelevant in the reconsolidation process, while settlement is process dependent.

Author : Andrew McNamara
Publisher : CRC Press
ISBN 13 : 0429797680
Total Pages : 776 pages
Book Rating : 4.82/5 ( download)

DOWNLOAD NOW!

Download or read book Physical Modelling in Geotechnics, Volume 1 written by Andrew McNamara and published by CRC Press. This book was released on 2018-07-11 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physical Modelling in Geotechnics collects more than 1500 pages of peer-reviewed papers written by researchers from over 30 countries, and presented at the 9th International Conference on Physical Modelling in Geotechnics 2018 (City, University of London, UK 17-20 July 2018). The ICPMG series has grown such that two volumes of proceedings were required to publish all contributions. The books represent a substantial body of work in four years. Physical Modelling in Geotechnics contains 230 papers, including eight keynote and themed lectures representing the state-of-the-art in physical modelling research in aspects as diverse as fundamental modelling including sensors, imaging, modelling techniques and scaling, onshore and offshore foundations, dams and embankments, retaining walls and deep excavations, ground improvement and environmental engineering, tunnels and geohazards including significant contributions in the area of seismic engineering. ISSMGE TC104 have identified areas for special attention including education in physical modelling and the promotion of physical modelling to industry. With this in mind there is a special themed paper on education, focusing on both undergraduate and postgraduate teaching as well as practicing geotechnical engineers. Physical modelling has entered a new era with the advent of exciting work on real time interfaces between physical and numerical modelling and the growth of facilities and expertise that enable development of so called ‘megafuges’ of 1000gtonne capacity or more; capable of modelling the largest and most complex of geotechnical challenges. Physical Modelling in Geotechnics will be of interest to professionals, engineers and academics interested or involved in geotechnics, geotechnical engineering and related areas. The 9th International Conference on Physical Modelling in Geotechnics was organised by the Multi Scale Geotechnical Engineering Research Centre at City, University of London under the auspices of Technical Committee 104 of the International Society for Soil Mechanics and Geotechnical Engineering (ISSMGE). City, University of London, are pleased to host the prestigious international conference for the first time having initiated and hosted the first regional conference, Eurofuge, ten years ago in 2008. Quadrennial regional conferences in both Europe and Asia are now well established events giving doctoral researchers, in particular, the opportunity to attend an international conference in this rapidly evolving specialist area. This is volume 1 of a 2-volume set.

Author : Marco Barla
Publisher : Springer Nature
ISBN 13 : 3030645142
Total Pages : 1029 pages
Book Rating : 4.44/5 ( download)

DOWNLOAD NOW!

Download or read book Challenges and Innovations in Geomechanics written by Marco Barla and published by Springer Nature. This book was released on 2021-01-14 with total page 1029 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the latest advances, innovations, and applications in the field of computational geomechanics, as presented by international researchers and engineers at the 16th International Conference of the International Association for Computer Methods and Advances in Geomechanics (IACMAG 2020/21). Contributions include a wide range of topics in geomechanics such as: monitoring and remote sensing, multiphase modelling, reliability and risk analysis, surface structures, deep structures, dams and earth structures, coastal engineering, mining engineering, earthquake and dynamics, soil-atmosphere interaction, ice mechanics, landfills and waste disposal, gas and petroleum engineering, geothermal energy, offshore technology, energy geostructures, geomechanical numerical models and computational rail geotechnics.